Troubleshooting Trailer Fuses Blowing On 2019 Honda Odyssey
Question:
2019 Honda Odyssey Rear Fuse Panel Slots 10, 11 and 12 are pre-pinned for Trailer Harness. Could you tell me what each slot is specifically for? I am blowing a fuse and need assistance tracking down what the slot is for so that I can troubleshoot the issue.
asked by: James
Expert Reply:
I would be happy to help you identify the functions, but besides knowing that fuse 10, 11, and 12 in your 2019 Honda Odyssey are for the trailer towing functions, Honda does not list specifically what each one does.
Now there is a way to figure out, but it will require a circuit tester like # PTW2993.
What you will need to do is remove one fuse at a time and use the circuit tester on each wire of the 4-way connector and see which function is no longer working.
The function of the connector are as follows:
Brown wire is tail light/clearance lights
Green wire is passenger side tail light
Yellow wire is driver side tail light
White wire is ground which won't have a fuse
You should have one fuse for each function, and that will give you at least a good starting place to start the troubleshooting.
I included a link to a helpful article on wiring for you to take a look at.
Products Referenced in This Question
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 525 lbs TW
- 3500 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Q&A: Curt Trailer Wiring Harness Does Not have Power on a 2016 Honda Odyssey
- Shop: Hook Probe Circuit Tester
- Q&A: Does Battery Amperage Double When Batteries are Wired In Series or Parallel
- Q&A: Do Additional Fuses get Installed for a Trailer Wiring Harness for a 2018 Honda Odyssey
- Q&A: Troubleshooting Trailer Right Stop/Turn Signal not Functioning on a 2011 Honda Odyssey 4-Way
- Q&A: Can I Use a 4 Way Vehicle Connector with 7 Way Adapter and the Curt Echo Brake Controller?
- Shop: Replacement Step Pad for Aries 4" Wide Oval Nerf Bars
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Q&A: Trailer Running Lights Not Working with a 7-Way to 4-Way Adapter
- Q&A: Do I Install a 10 Amp or 30 Amp Fuse for Trailer Lights in the Fuse Box for a 2013 Toyota Highlander
- Shop: 7-Way RV Upgrade Kit for Trailer Brake Controller Installation - 12 Gauge Wires
- Shop: Brake Controller
- Shop: Trailer Hitch
- Search Results: brake controller
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Choosing the Right Trailer Wiring
- Video: Choosing the Right Brake Controller
- Article: Trailer Wiring Diagrams
- Search Results: trailer brake controller
- Video: Tow Ready 4-Pole Mounting Bracket Installation
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: 90160
- Article: Brake Controller Installation: Starting from Scratch
- Shop: Redarc Tow-Pro Liberty Brake Controller - Dash Knob - 1 to 2 Axles - Proportional
- Video: Redarc Tow-Pro Liberty Brake Controller Review RED24FR
- Shop: Gooseneck Hitch
- Search Results: etbc7
- Shop: Suspension Enhancement
on Trailer Hitch
