How To Carry Two Surfboards On a TracRac Ladder Rack

Question

Question:

What do you recommend for carrying two surfboards on top of my Trac Rac? I know the channel is a certain size so I want to make sure it will fit.

asked by: Nick

0

Expert Reply:

If you have the older TracRac branded ladder rack then channel mounts are the only option, the Inno Locker Watersport Carrier part # INXA445 is what I recommend. It comes with locks for security and is really the only carrier for this setup. It also works with the newer Thule branded TracRac ladder rack as well.

expert reply by: Conner L

0

Answer 1

Inno offers a kayak carrier that mounts into the T-slots in rack bars, their Locker Watersport Carrier #INXA445. If you refer to the linked diagram you can see the slot dimensions this carrier will fit into. The carrier also needs a bar spread of no…

view full answer...

Answer 2

The Inno Locker Watersport Carrier - Locking - Channel Mount #INXA445 will definitely fit with the channels on the Thule WingBar Evo Crossbars! I really like the channel mount system because it looks a bit more clean since there isn't a whole…

view full answer...

Answer 3

The Inno Kayak Carriers #INA446 and the #INA445 are not a fit for TracRac crossbars but the #INXA445 likely would work with the channels of the crossbars that are 4 inches wide and 1-1/2 inches tall but have a similar channel to most aftermarket…

view full answer...

Answer 4

I do have an option for you to carry a surfboard on your TracRac Ladder Rack but due to the shear size of the crossbars we do not have a pad that will fit around them. Instead you will want to utilize the t-slots in the TracRac's crossbars. The…

view full answer...

Answer 5

Since the older TracRac bars are so thick your Thule 883 Slide and Glide will not work. This carrier will fit onto bars that are no taller than 1-1/2" wide, and 3-5/8" thick. Instead, I recommend replacing your Thule 883 Slide and Glide,…

view full answer...

Answer 6

The Thule Compass Kayak Carrier #TH890000 is designed to fit on a variety of roof rack crossbars, including factory crossbars on most vehicles. As long as the crossbars on your 1995 Toyota 4Runner are not more than 3-1/4" wide and 1-1/4"…

view full answer...

Answer 7

Since you're wanting to install a J-Style carrier on the Thule Xsporter Pro #TH500XTB full-sized crossbars we need to check out the Kuat kayak carriers as they will be wide enough to fit the larger crossbars on your 2022 Ram 1500. For a standard…

view full answer...

Answer 8

I did some research and was able to find an option for a kayak carrier you can use on your 53 inch crossbars to fit alongside the Yakima SkyBox 18 Rooftop Cargo Box #Y07336. What you can use is a kayak carrier from Kuat that will fit the T-slot…

view full answer...

Answer 9

The Thule Hull-A-Port Aero #TH849000 will take up 18 inches of bar space.

view full answer...

Answer 10

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 11

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

How To Carry Two Surfboards On a TracRac Ladder Rack

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching