SumoSprings that Fit 2020 Ram Power Wagon

Question

Question:

Will these work on a 2020 dodge power wagon?

asked by: Stephen S

0

Expert Reply:

Yes the SumoSprings part # SSR-312-47 are a confirmed fit for your 2020 Ram Power Wagon.

expert reply by: Jameson C

0

Answer 1

There are going to be three of the SumoSprings helper springs available for your 2022 Ram 2500. SumoSprings Rebel #SS27GR SumoSprings Solo Yellow #SSR-312-54 SumoSprings Solo Black #SSR-312-47 The Rebel springs will have the highest weight capacity…

view full answer...

Answer 2

I would be happy to help you find a pair of SumoSprings for your 2021 Ram 2500.I recommend the SumoSprings Solo Custom Helper Springs - Rear Axle item #SSR-312-47. These 1,500-lb capacity springs allow you to upgrade your Ram 2500's rear…

view full answer...

Answer 3

For your 2020 Ram 2500 Power Wagon the best air bag suspension kit is the part #F2598 which we have confirmed with Firestone as the correct fit for your truck. The Firestone kits are known to be the highest quality so we recommend them the highest. I…

view full answer...

Answer 4

The Firestone Ride-Rite Air Helper Springs, part #F2598, can indeed work with your 2019 Ram 2500. However, because of your desire to have an easy ride when not loaded, I do not recommend going with air springs. Even on the lowest psi, there will be…

view full answer...

Answer 5

The SumoSprings Solo Custom Helper Springs, part #SSR-117-47, are 9-1/2 inches from where they bolt to the truck's frame to the bottom of the spring. They're desiged to fit Ford F-150's from 2009 to 2018. I've linked a video fo them…

view full answer...

Answer 6

Yes, I would recommend keeping the bolts of the #AP233 lubricated. An easy way to do this is to use wet bolts like part #126B2 which have a zerk fitting that allows for easy application of grease to them.

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Answer 10

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

SumoSprings that Fit 2020 Ram Power Wagon

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching