Does The Rhino-Rack Nautic 580 Kayak Carrier Fit Onto The Yakima Jetstream Crossbar's Top Channel?

Question

Question:

Wil this Rhino kayak carrier fit in the t-track slot on Yakima Jetstream bars?

asked by: Nick H

0

Expert Reply:

Yes, the Rhino-Rack Nautic 580 Side Loading Kayak Carrier - Saddle Style - Side Loading - Channel Mount # RR580 is indeed compatible with the Yakima Jetstream crossbars. The t-slot track is the same size and you will not have any issues with this setup. I attached a demonstration video for you to check out.

expert reply by: Andrew N

0

Answer 1

To use the 49" Rhino-Rack Vortex roof rack on your 2016 Nissan Rogue you need the following parts: 49" Vortex Aero Crossbars - #RRVA126B-2 2500 Series Legs - #RRRLKVA DK Fit Kit - #DK396 The fit kit uses clamps that secure to the…

view full answer...

Answer 2

Yes, the Thule Hull-A-Port J-style kayak carrier #TH834 will fit fine on Yakima Core Bar roof rack crossbars. These bars, such as 50-inch set #Y00421, have an aero profile that is fully compatible with the hardware on the Hull-A-Port.

view full answer...

Answer 3

The 815 part number is for a basic version of the Hull-A-Port #TH834 kayak carrier sold by some lesser retail outlets. The Hull-A-Port carrier fits on round, square, elliptical, aero and most factory crossbars. Rhino-Rack Vortex 2500 bars are the…

view full answer...

Answer 4

The crossbar spread will vary depending on the accessory you want to put on the roof rack. The Yakima FrontLoader Wheel Mount Bike Carrier, part #Y02103 will work with a crossbar spread between 16 and 48 inches, so you can see it will work with…

view full answer...

Answer 5

To install a set of Yakima Jetstream crossbars to a Skyline tower you do need the adapter part #8880637.

view full answer...

Answer 6

I'll start off with the ski rack for your 2024 Jeep Grand Cherokee Laredo since that is fairly simple. I recommend the Rhino-Rack Ski and Snowboard Carrier #RR574. This is capable of holding 4 pairs of skis, has an aluminum construction for…

view full answer...

Answer 7

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 10

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 11

Thanks for reaching out to verify, Frank! Yes, those parts (listed below) will fit great together and on your 2010 Honda Accord Crosstour with the naked roof. Inno Roof Rack - Aero Crossbars #INXB130-138 - Through Feet #INXS250 - Fit Kit #INK587 The…

view full answer...

Answer 12

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...

Does The Rhino-Rack Nautic 580 Kayak Carrier Fit Onto The Yakima Jetstream Crossbar's Top Channel?

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching