Recommended Trailer Hitch Receiver For 2021 Toyota Camry Hybrid

Question

Question:

I have a 2021 Hybrid Toyota Camry and wasnt sure it I could put a trailer hitch on it then watched your video showing hitch being put on. It appears to be a rather specific installation so can you direct me to and someone local who would know how to install it correctly?

asked by: James G

0

Expert Reply:

The Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11576 would work great on your 2021 Hybrid Toyota Camry. It offers a fairly simple installation process, but does require some trimming and drilling underneath. I attached an installation video for you to check out which is likely the one you had seen previously.

In regard to finding an install shop, we fortunately have a dealer network so that you can find a local installer! Simply click on the "locate installers near me" on the hitch product page (underneath the photos). Hope this helps!

expert reply by: Andrew N

0

Answer 1

Yes, Curt hitch #C11576 fits your 2019 Toyota Camry Hybrid and it weighs approximately 24-lbs. It fits all Hybrid versions, the LE, SE and XLE. Installation instruction are linked for reference. It will give you a 1-1/4-inch receiver opening with a…

view full answer...

Answer 2

The Ecohitch Hidden Toyota Prius and Prius #306-x7178 is confirmed to fit the 2010 Toyota Prius. It has a 2" receiver opening and can carry your Kuat NV base bike rack if you have the 2 bike version. This hitch has a 300lb tongue weight and…

view full answer...

Answer 3

Yes. The EcoHitch #306-X7178 is designed to fit the 2010 Toyota Prius; because the Prius is an entirely hybrid electric vehicle there isn't any distinction between the frames so the hitches will fit all of the models of the 2010 Prius. I've…

view full answer...

Answer 4

We do have a hitch for your 2011 Toyota Prius that has a 2 inch opening with the EcoHitch part #306-X7178 which would work great but you need to be sure not to exceed the tongue weight capacity of this hitch which is 300 lbs and the capacity of your…

view full answer...

Answer 5

The only available hitches for a 2010 Toyota Prius have 1-1/4" receiver openings and are Class I rated. Class I racks are limited to carrying two bikes, though there are some that have an available adapter that allow bikes to be used with either…

view full answer...

Answer 6

I believe you are talking about the 1/4" nuts and bolts that are a part of the hardware that comes with the EcoHitch Hidden Trailer Hitch #306-X7178. I took a look at the installation instructions and the purpose of that hardware is to use only…

view full answer...

Answer 7

I do have an option for you but the only trailer hitches for a 2018 Toyota Camry are class I, 1-1/4". I recommend the Curt Trailer Hitch Receiver part #C11576 which offers a bolt-on fit. The issue with this is that most mobility scooter carriers…

view full answer...

Answer 8

Depending on your climate and how much salt your area ends up putting on the roads will great affect how quickly a hitch would get rusty. If you're up north in the "rust belt" it's very likely a hitch is going to develop surface…

view full answer...

Answer 9

For your 2021 Toyota Camry LE Hybrid I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" Item #C11576. It is confirmed to fit all models, hybrid and non-hybrid, and has a 2,000lbs GTW and 200lbs TW capacity. This trailer…

view full answer...

Answer 10

I reached out to my contact at Curt Manufacturing about the Curt #C24HR hitch for the 2021 Nissan Rogue and what possible issues there may be with the operation of the liftgate sensor or the rear distance sensors. They told me that those Rogue…

view full answer...

Answer 11

The Tekonsha T-One #118304 and Curt T-Connector #C55580 Vehicle Wiring Harnesses are very similar. These are both custom fit wiring harnesses that include a tail light converter, which is required for your 2007 Toyota Sienna because the brake and…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Recommended Trailer Hitch Receiver For 2021 Toyota Camry Hybrid

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching