2019 Dodge Journey Receiver Hitch and Wiring Recommendation

Question

Question:

Is the wiring harness for the hitch receiver a separate purchase or does it come together with the hitch receiver? Thanks.

asked by: Herman B

0

Expert Reply:

The etrailer Trailer Hitch Receiver # e98845 is what I recommend for your hitch. It has a rugged matte black finish to better match your 2019 Dodge Journey. The wiring will be sold separately and for your particular Journey you will need to specify for standard Incandescent bulb taillights Vehicle Wiring Harness # C56109 or for LED taillights Vehicle Wiring Harness # C56330.

expert reply by: Bud M

0

Answer 1

For your 2018 Dodge Journey GT you will need either the Kit #118567 if you have incandescent tail light or the Kit #118536 if you have LED tail lights. This will require connecting in line of your tail lights and running a power wire to the battery.…

view full answer...

Answer 2

The easiest way to determine if you have LED or incandescent lights on your Dodge Journey is to simply watch them illuminate and turn off. If they come on immediately and turn off immediately then they are most likely LEDs. LEDs will also be quite a…

view full answer...

Answer 3

Your 2017 Dodge Journey is one of the vehicles for which two types of hitch are made, both a smaller 1-1/4-inch Class II hitch and a 2-inch Class III. In such cases we always recommend the 2-inch option since it will be compatible with more…

view full answer...

Answer 4

Both the L XT Motion #TH629806 and the XL #TH629906 are a fit for your 2021 Subaru Outback Wagon with factory roof rack. I wouldn't say either is oversized for your application but going with the smallest size that fits your needs would be the…

view full answer...

Answer 5

The most likely cause for the turn signals not to work when the running lights are on with your trailer is a bad or weak ground. It's very possible that a weak ground connection can be just strong enough to allow sufficient current for some…

view full answer...

Answer 6

I can help you identify your tail lights as the images you sent are of a connector that is not part of the taillight wiring on your 2013 Dodge Journey. I have attached images of the LED and incandescent taillights that your Journey could have. The…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

The best hitch for a 2024 Subaru Outback is the etrailer item #e25TR. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver, that has a 3,500 lbs towing capacity and a 350 lbs…

view full answer...

2019 Dodge Journey Receiver Hitch and Wiring Recommendation

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching