Availability Of Front Mount Trailer Hitch Receiver For 2005 Chevrolet Astro

Question

Question:

I am looking for a 2 front receiver hitch for a 2005 Chevy Astro, do you have one? I realize that I might have to cut plastic bumper/fairing.

asked by: John L

0

Expert Reply:

I may have an option for you, but there is not a custom fit front mount trailer hitch receiver confirmed to fit your 2005 Chevrolet Astro.

We have had customers use a universal hitch like the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver - Weld On - Class V - 2" # 41990-07 to add a front mount hitch to their vehicle. This will likely require trimming of the bumper fascia and a fitting the brackets to fit the frame of your Astro. I recommend having a qualified welder complete the installation to make sure the hitch is securely attached.

I included a picture of the # 41990-07 used as a front mount hitch for you to take a look at.

expert reply by: Samuel C

0

Draw-Tite # 41990-07 Used As Front Mount Hitch
(click to enlarge)

Answer 1

The distance from the top of the mounting flange or bottom of the truck frame is to the top of the receiver tube on the Curt Trailer Hitch Receiver part #C15312 is 5-5/8".

view full answer...

Answer 2

Both of the Curt hitch receivers have the same bolt hole measurements. It's 9 inches from the first hole (Closest to the front of the truck) to the second hole and 5-1/2 inches from the second to the third. There's 39 inches across from hole…

view full answer...

Answer 3

All of the aftermarket trailer hitches that we carry for your 2011 Dodge Ram 1500 Bighorn state that they will not fit with a factory installed hitch, however, this typically refers to the factory hitches that hang below the rear bumper. I have heard…

view full answer...

Answer 4

I went to the warehouse and measured the Curt Trailer Hitch Receiver, part #C15703. I have attached a photo of the trailer hitch and have noted the dimensions you can check out. This is a Class V trailer hitch and it has a 2-1/2 inch receiver…

view full answer...

Answer 5

I went out to the warehouse and measured the Curt Trailer Hitch Receiver #13053 to find the distance between those 2 points is 35-7/8" as you can see in the attached photo. Please note that this trailer hitch fits the following vehicles: 2004 -…

view full answer...

Answer 6

I will be happy to provide you with the dimensions and hole spacing on the brackets included with trailer hitch #41990-07 to see if it will work on your cab and chassis 2004 Ford F-550. I have included a picture with the measurements.

view full answer...

Answer 7

According to my contact in the Tech Services department at Curt Manufacturing, the drop, or distance between the top of the mounting flange of the #14053 Class IV hitch and the top of the receiver tube is exactly 2 inches. You can see this in the…

view full answer...

Answer 8

The Brophy Hitch Reducer and Extender #HR26 will work if you have a 2-1/2 inch hitch receiver on your 2014 Chevy Silverado and have a 2 inch ball mount like the Gen-Y Glyder Shock Absorbing Ball Mount for 2" Hitches #325-GH-12005. If you have a…

view full answer...

Answer 9

The Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2" #14053 is a confirmed fit for the Ford Full Size Van but it is not a fit for a cab and chassis like you have which has a slightly wider frame. My recommendation due to the weight you…

view full answer...

Answer 10

The mounting holes the Curt Trailer Hitch Receiver #14053 measure 38-1/4" and 38-3/4" width-wise and then from the center of the of the forwardmost to the rearmost is 13-1/4". Attached is a dimensional photo for you to reference. This…

view full answer...

Answer 11

I attached a picture that has basically every dimension of the Curt hitch part #C13161. It will hang down 8.28 inches from the mounting surface. From the rear mounting flange to the hitch opening it measures 15-3/4 inches.

view full answer...

Answer 12

Curt does not have that measurement available, but you can determine this for yourself by taking some measurements from the underside of your truck. Using the diagram I edited for you, locate the weldnut that would serve as the rear-most attachment…

view full answer...

Availability Of Front Mount Trailer Hitch Receiver For 2005 Chevrolet Astro

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching