Front Trailer Hitch Recommendation for a 2007 Chevrolet Colorado

Question

Question:

please recommend a DIY front mount trailer hitch receiver for a 2007 Chevy colorado 4x4. Will i have to remove the plastic flange to install. I need easy installation . Thanks

asked by: Mark

1

Helpful Expert Reply:

We have a custom fit front mount hitch for your 2007 Chevrolet Colorado 4x4 in part # 31221 by Curt Manufacturing. This will be the easiest front hitch to install on your truck and requires no drilling. According to Curt, the fascia trimming is only required on 2010 model year Colorado due to a slightly different front bumper fascia. You will not need to trim the fascia on your 2007 model.

This is the only front hitch designed to fit your Colorado. The only other options would be to have a hitch custom welded to your truck by a metal fabricator, which I wouldn't recommend knowing this hitch is available.

expert reply by: John H

1

Answer 1

The Curt Front Mount Trailer Hitch Receiver part #31221 is an excellent option and a confirmed fit for a 2005 Chevrolet Colorado. It features no-drill installation and will allow you to carry bikes, haul extra cargo, mount a winch, or use a…

view full answer...

Answer 2

I checked with Curt and they do list front hitch #31221 as a fit for all models of the 2005 Chevy Colorado so that does include your Z71 crew cab model!

view full answer...

Answer 3

The Curt Front Mount Hitch, #31221, will fit all models of the 2009 Chevy Colorado included your 2 wheel drive model. I have included a link to the installation instructions for you. I also recommend securing any accessories you might use in the…

view full answer...

Answer 4

I have what you need. Check out the linked video on the Roadmaster Crossbar-Style Base Plate Kit part #3122-1. At around the 4:00 minute mark you will see the bracket and it's required position. This video is on a 2010 but it will give you…

view full answer...

Answer 5

For your 2007 Chevy Colorado LT 4 wheel drive we have the Curt front hitch part #31221 as a confirmed fit that will work great. The capacities of the hitch are 500 lbs vertical load and 9,000 lbs line pull.

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 8

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 9

The installation instructions for this product are recommended for individuals who have experience winding torsion springs. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install…

view full answer...

Answer 10

The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.

view full answer...

Answer 11

The amount of bow that's put into trailer axles like the #7359765 is based on about how much a trailer is typically going to weigh that has a 3,500 lb capacity. So there's a bit of approximation and obviously it can't be totally perfect…

view full answer...

Answer 12

M12-1.5 and 1/2"-20 threads are not going to be interchangeable. The diameter of an M12 thread is only going to be 0.4724" while 1/2" threads are going to be 0.500" in diameter. We currently only have 1/2"-20 Lug Nuts…

view full answer...

Front Trailer Hitch Recommendation for a 2007 Chevrolet Colorado

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching