Front Mount Trailer Hitch Receiver for a 2009 Chevy Colorado with 2 Wheel Drive

Question

Question:

I was just wondering if this hitch would fit a 2009 chevy Colorado 2wd

asked by: Kinzel K

0

Expert Reply:

The Curt Front Mount Hitch, # 31221, will fit all models of the 2009 Chevy Colorado included your 2 wheel drive model. I have included a link to the installation instructions for you. I also recommend securing any accessories you might use in the hitch with a locking hitch pin, # e98882.

expert reply by: Michael H

0

Answer 1

For your 2007 Chevy Colorado LT 4 wheel drive we have the Curt front hitch part #31221 as a confirmed fit that will work great. The capacities of the hitch are 500 lbs vertical load and 9,000 lbs line pull.

view full answer...

Answer 2

I have what you need. Check out the linked video on the Roadmaster Crossbar-Style Base Plate Kit part #3122-1. At around the 4:00 minute mark you will see the bracket and it's required position. This video is on a 2010 but it will give you the…

view full answer...

Answer 3

The Curt Front Mount Trailer Hitch Receiver part #31221 is an excellent option and a confirmed fit for a 2005 Chevrolet Colorado. It features no-drill installation and will allow you to carry bikes, haul extra cargo, mount a winch, or use a snowplow.…

view full answer...

Answer 4

We have a custom fit front mount hitch for your 2007 Chevrolet Colorado 4x4 in part #31221 by Curt Manufacturing. This will be the easiest front hitch to install on your truck and requires no drilling. According to Curt, the fascia trimming is only…

view full answer...

Answer 5

I checked with Curt and they do list front hitch #31221 as a fit for all models of the 2005 Chevy Colorado so that does include your Z71 crew cab model!

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

The Trailer Leaf Spring, 2250 lbs. 6 Leaf, item #e27SR, is sold as a replacement spring for older trailers and measures 26 inches for eye to eye, center to center. If you are replacing the springs and hangers you will need to use the same center to…

view full answer...

Answer 8

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 9

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 10

While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular grease…

view full answer...

Answer 11

The installation instructions for this product are recommended for individuals who have experience winding torsion springs. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install…

view full answer...

Answer 12

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Front Mount Trailer Hitch Receiver for a 2009 Chevy Colorado with 2 Wheel Drive

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching