Replacement Brake Shoes for Axle Tek 10 Inch x 2.25 Inch Manually Adjusted Brakes
Question:
Looking for brake shoes 2014 Puma with 15 wheels. Brakes 10X2.25 are manual adjust and the drums are Axletek 1338 -BD-65535. I have a picture of the assy.
asked by: Joe S
Expert Reply:
We don't have a way of knowing for sure the exact brakes that are on your coach, but the Axle Tek drums lead me to believe that the brakes are likely the same. For that reason you could use the Replacement Shoe and Lining Kit for Manual Adjusting 10" Electric Brake Assembly - 3,500 lbs # AKBRKR-S-10, which are compatible with brake assemblies from most manufacturers, including AxleTek, Dexter, Lippert (LCI), IAC, and AL-KO. These are 10" x 2.25" shoes, so they'll be the correct size.
If you wanted to replace the whole assembly, you could use the # AKEBRK-35-SA, which are self adjusting brakes and would save you the trouble of having to manually adjust your brakes and give you completely new brakes all around. You would need brake mounting hardware for those, which is available with # BRKH10B.
I've linked some review videos of these parts for you to check out, as well. If you have a different brand of brakes on your coach that isn't mentioned above, just let me know and I can confirm those will still work or let you know if there is an alternative.
Products Referenced in This Question
Replacement Shoe and Lining Kit for Manual Adjusting 10" Electric Brake Assembly - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- RH
- 3500 lbs
- Brake Shoes
- 10 Inch
- etrailer
more information >
Mounting Hardware for 10" Brake Assemblies
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Hardware
- 10 Inch
- Redline
more information >
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Search Results: bearing buddy 1.980
- Search Results: akbrkr~s~10
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Video: etrailer Trailer Brakes AKBRKR-S-10 Review
- Shop: Replacement Shoe and Lining Kit for Manual Adjusting 10" Electric Brake Assembly - 3,500 lbs
- Shop: Replacement Shoe and Lining for 7" Electric Brake Assemblies - 2,000 lbs
- Search Results: bearing buddy
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Article: Most Popular Wheel Bearings
- Shop: Trailer Wiring
- Article: Trailer Tire Sizing
- Search Results: bk2~100
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Trailer Hitch
- Search Results: l44649
- Shop: Brake Controller
- Shop: Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Video: etrailer Trailer Idler Hub Assembly Installation
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Video: Dexter Electric Trailer Brake Kit Installation 23-26
- Article: Trailer Wiring Diagrams
- Search Results: l68149
- Search Results: 25580
- Video: Review of CE Smith Trailer Hubs and Drums - Idler Hub - CE13515
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Base Plate for Tow Bar
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Testing Trailer Brake Magnets for Proper Function