Hardware Included With Draw-Tite 36501 Class II Trailer Hitch
Question:
What is the weight of the class 2 36501 hitch? The installation instruction PDF wont open. What carriage bolt and nut size does this kit use?
asked by: Jonathan O
Expert Reply:
The shipping weight of the Draw-Tite # 36501 Class II hitch is 28 lbs which would be about 25 lbs minus the shipping packaging.
Purchase of the hitch includes all necessary installation hardware. The hitch uses four 1/2-13 x 1.75 grade 8 carriage bolts and four grade 8 1/2-13 hex nuts. You'll also need four .250 x 1.00 x 3.00 inch square hole spacers and four 1/2 inch conical toothed washers. The conical toothed washers and spacers are specialty hardware that you're unlikely to find locally.
You can obtain the replacement hardware by ordering part # RHK, inputting '36501' in to the field on the linked product page, and choosing 'Draw-Tite' from the drop down menu.
If you'll be towing with the hitch, you'll also need a trailer wiring harness like # 118426, a ball mount like part # 36051 and # 19256 for a 1-7/8 or # 19258 for a 2 inch trailer ball.
I've linked to the installation instructions and to an install video for you.
(click to enlarge)
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise, 1-1/4" Drop - 7" Long - 3.5K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 1 Inch
- Rise - 1 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- Draw-Tite
more information >
Replacement Hardware Kit for Trailer Hitches
- Accessories and Parts
- Trailer Hitch
- Hardware
- etrailer
more information >
Product Page this Question was Asked From
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class II
- 300 lbs TW
- 3500 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Grease Seal to Replace Transcom Seal 22333VB in 5th Wheel Hub
- Q&A: Is There An LED Replacement for the Bargman 30-91-010 Trailer Tail Lights
- Article: Trailer Maintenance Schedule
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What Roof Rack Kits Will Work with the RetraxPRO XR Hard Tonneau Covers
- Q&A: Fastener Kit Needed for the Draw-Tite Trailer Hitch # 36501
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Q&A: Replacement Latch, Locks, and Keys for a Karrite Voyager Cargo Box
- Article: Which Hitches are Made in the USA
- Article: My Trailer Hitch Doesn't Fit
- Article: Replacement Automotive Lighting
- Article: Rust Prevention