Availability Of Wire Basket E-Track Mounts

Question

Question:

Good day, Do you sell the mounting brackets for a wire basket separately? Thanks and Best Regards

asked by: Shaker B

0

Expert Reply:

I have another option for you, but the mounting brackets used to mount a wire basket on an e-track or x-track rail are not sold separately.

To mount a basket on your e-track or x-track rails you will want the CargoSmart Wire Basket for E-Track and X-Track Small # 3481720, Medium # 3481719, or Large # 3481718.

Each of these options includes the required brackets to mount the baskets to your e-track or x-track rails.

I included a video of the CargoSmart Baskets for you to take a look at.

expert reply by: Samuel C

0

Answer 1

Thanks so much for that info it was really helpful, and we do have the right Equal-i-zer weight distribution hitch for your trailer with 850 lbs of tongue weight; the correct part is the following: - Equal-i-zer Weight Distribution System #EQ37100ET…

view full answer...

Answer 2

E-tracks are typically the stronger of the two, but X-track is more versatile since you can mount them horizontally or vertically. Choosing between the two really depends upon how you plan to use them. If you are installing something in a truck bed,…

view full answer...

Answer 3

Equal-I-zer uses a 3/4 inch brass washer. We sell the washers along with the spacer rivet as part #EQ95-01-9450. I'd recommend sticking with brass washers if at all possible.

view full answer...

Answer 4

We can get your 2019 Ford F-450 set up with camper tie-downs for a truck camper, and what you will need is the following, so long as you A) have the factory trailer hitch and B) do NOT have factory flip-out steps that are mounted under the truck bed.…

view full answer...

Answer 5

The Traffic Cone Holder, #RA-26, that you mentioned is designed to store cones that are 12" - 36" tall, and the arm of the holder is 22-3/8" long. The arm does not fold down a full 90 degrees, so this would not be the best option for…

view full answer...

Answer 6

I have a solution for you but the Buyers Products Hitch Plate for Pintle Mounting item #3371809030B only fits 1999 and newer Ford F-350's. For your 1986 F-350 Cab and Chassis you will want the Buyers Products Flatbed/Flatbed Dump Hitch Plate…

view full answer...

Answer 7

The legs for the CargoSmart Folding Workbench Brackets #3481744 will sit 22-21/2" away from the wall when in the deployed position, and then the brackets are 2-1/2" tall so they will stick out that far from the wall. My contact at…

view full answer...

Answer 8

It sounds like you've already seen that the Draw-Tite front mount hitch, part #65078, isn't confirmed to fit your 2017 GMC Sierra 2500 because of the Denali trim package. I tried to determine exactly how much fascia trimming is needed to see…

view full answer...

Answer 9

The tow hooks on your 2015 Chevrolet Silverado 3500 do not need to be removed to install the Draw-Tite Front Mount Trailer Hitch Receiver part #65078. The bolts that hold the tow hooks do get removed but only to set the trailer hitch in place as they…

view full answer...

Answer 10

I really like the Rack'em Single Hook Rack #RA-8. These padded heavy-duty hooks aren't specifically designed for bikes but they will offer a higher weight capacity that should handle your bikes, especially when using 2 of them per bike to…

view full answer...

Availability Of Wire Basket E-Track Mounts

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching