Does Dexter Trailer Springs Over-Under Kit, Part # K71-385-00, Fit Haulmark 18-Ft Tandem Trailer
Question:
I have a haulmark 18 foot tandem axle trailer. Would this product work to flip my axle? I would need to purchase two of these?
asked by: Josh
Expert Reply:
Haulmark produces a number of different 18-foot tandem axle trailers. This kit is applicable only to trailers with leaf springs and should be installed only if the suspension overall is in good working order. One kit is required per axle.
Please note we offer this kit for 3-inch axles and also another kit, part # K71-384-00, for 2-3/8 inch axles. Typically, 2-3/8 inch axle diameter is a 3500 lb rating; and 3 inch axle diameter is typically a 6000 to 7200 lb weight rating. You will want to confirm your axle diameter before ordering.
These kits are bolt-on, but the manufacturer does strongly recommend tack welding the new spring seats in place to prevent axle slippage. I have forwarded the installation instructions.
I have also included a photo showing how the various parts are to be assembled.
Bear in mind that lifting your trailer will result in changes to its geometry and balance; tongue weight could change and the potentially top-heavy stance could require a weight distribution system with sway control to restore handling. I have included a link to an article on weight distribution and sway control.
If you are looking to raise the trailer because it is too low relative to the hitch on the tow vehicle, the easiest and least costly solution is a new ball mount with more drop. I have included a link to our page for ball mounts which allows you to search products (using the blue sort keys on the left) for the specific amount of drop required. I have also included an article on selecting the appropriate ball mount.
Products Referenced in This Question
Dexter Trailer Springs Over-Under Conversion Kit
- Trailer Suspension Parts
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Round Axle - 2-3/8 Inch
- Single Axle
- Dexter
more information >
Product Page this Question was Asked From
Dexter Trailer Springs Over-Under Conversion Kit
- Trailer Suspension Parts
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Round Axle - 3 Inch
- Dexter
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Raise Your Travel Trailer Height
- Q&A: How to Raise a 5th Wheel Trailer so it Rides Level
- Article: Trailer Tire Sizing
- Article: Double-Eye Trailer Suspension System Review
- Q&A: Can 3,500 lb Axle Trailer Leaf Spring 25-1/4 inch get Replaced with 5k Rated Spring
- Q&A: Recommended Suspension Enhancements for a 2022 Grand Design Imagine 2910BH
- Article: Slipper Spring Trailer Suspension System Review
- Article: Most Popular Wheel Bearings
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Is it Possible to Raise Suspension of Trailer that Has Slipper Springs
- Q&A: Installation of Dexter Kit # K71-385-00
- Q&A: Do Spring Seats Have to Be Welded to Install Axle Over Under Kit
- Q&A: Replacement Leaf Springs and Wet Bolt Kit For a 2007 Fleetwood Redline 33 Toyhauler