Is There a Trailer Wheel with a 5 on 4-1/4 inch Bolt Pattern

Question

Question:

Jet ski trailer - I’m looking for a wheel 13” 5 lug with 4.25” pattern and 185/85R13 tire. I only found 5 lug with 4.5 pattern. Do you have options?

asked by: Robert W

0

Expert Reply:

The most popular trailer wheel bolt pattern is the 5 on 4-1/2 inch bolt pattern and as far as we are aware the bolt pattern you mentioned is not used on trailers at all. So my bet is you probably have the 5 on 4-1/2 inch. I attached a help article that has more info on checking bolt pattern for you to check out.

For a radial in the tire size of 185/80R13 with a 5 on 4-1/2 inch bolt pattern we have the part # AM32156 which would work great.

expert reply by: Jameson C

0

Seth B.

3/17/2024

You are wrong, 5 on 4 1/4 is a trailer rim

Reply

Jameson C.

3/18/2024

@SethB It must be super old as it's not one we've seen or have currently.

Reply

Answer 1

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this…

view full answer...

Answer 2

The 5 on 4-1/2 bolt pattern of a hub or wheel such as #AM20365 means that there are 5 lugs and, if you drew a circle that passed through the center of each lug the diameter would be 4-1/2 inches. I have included some links and a picture that will…

view full answer...

Answer 3

Both the 4.80/4.00-8 and 5.70-8 tires sizes will fit the same wheel size, 8 x 3-3/4 inch. The 5.70 is taller by 2 inches and wider by 1.2 inches. If you have more than 1 inch of space between the tire and a fender and more than 1.2 inches between…

view full answer...

Answer 4

Hi Tim, I reached out to Demco and they stated that the thread size of the Demco Actuator Replacement Master Cylinder for Drum Brakes #5650 is 3/8" -24 UNF. Demco lists that the brake line kit typically paired up with actuator would come…

view full answer...

Answer 5

The way to pick out a spare tire cover for a trailer wheel and tire is based on the diameter of the tire. Which for your tire size of ST145R12 you have a diameter of 21.3 inches. The white tire cover part #052963751000 would fit and work well for…

view full answer...

Answer 6

I do have a solution, but wheels with a 4 x 3.75 bolt pattern are not available. You may be able to find some wheels that match at a junk yard but nobody makes them anymore. That being said, I recommend switching the hubs on your trailer to hubs with…

view full answer...

Answer 7

Looks like you have a spline diameter of .56 inches and and threaded portion of 1/2 inch which is very popular. For that you'd want the part #K12WB2. I attached a picture that has a dimensional diagram for you to check out as well.

view full answer...

Answer 8

It looks like the Lil Rider trailer was made by Load Rite. They don't make that trailer anymore but they may have something like it. I could not find any pictures or schematics for your trailer so I am not sure what size or type it is. We do have…

view full answer...

Answer 9

While there is not a manual or video available for the Kodiak Disc Brake Caliper Rebuild Kit #KDBC225KIT I did find an expanded drawing of the parts of Kodiak Disc Brake Caliper #KDBC225S which should help so you can see how the pieces fit. The…

view full answer...

Answer 10

A ST145/R12 trailer tire like the Kenda Karrier #AM10130 measures 21.3" in diameter and 5.7" wide, and we do have spare tire covers which come in black that fit this size tire. What you need is one of the following spare tire covers: - Adco…

view full answer...

Answer 11

I have attached a chart you can check out that describes the torque needed per wheel size, wheel stud size and material. For an 8-inch wheel with a 1/2-inch wheel stud the torque is 75 to 86 ft-lbs. For a 15 inch steel wheel with 1/2 inch wheel studs…

view full answer...

Answer 12

Wheel bolt patterns are defined by two numbers: the first being the number of lug nuts and the second being the diameter of the circle the lug nuts are arranged in. So a 5 on 4-1/2 bolt pattern is 5 lugs arranged in a circle that is 4-1/2 inches in…

view full answer...

Is There a Trailer Wheel with a 5 on 4-1/4 inch Bolt Pattern

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching