2008 Winnebago View Screen Door Latch Right Hand Side

Question

Question:

Hi, I need a new screen door latch for my 2008 Winnebago View. It is a right handle. Can you please let me know which one?

asked by: Alex

0

Expert Reply:

For a Lippert Right Hand RV entry screen door latch you'd need the part # LC201471 which matches what your Winnebago View would need.

expert reply by: Jameson C

0

Answer 1

The Valterra Water Regulator for RVs #A01-1120VP helps reduce high pressure water supplies down to a usable pressure for your RV. Most RV's are designed for water at a certain pressure, so having a water pressure beyond what your RV is…

view full answer...

Answer 2

When determining what screen door latch you would need either the right hand or left hand side you would need to look at the closed door from the inside of your RV. The latch location is the side of the door that it is mounted on. This would mean…

view full answer...

Answer 3

To remove the screen for the MaxxAir MaxxFan Trailer Roof Vent w/ 12V Fan - Manual Lift - 14-1/4" x 14-1/4" - White, #MA00-04000K, you simply remove it from the 4 mounting tabs. These tabs rotate. I've attached a picture for…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 11

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 12

The trailer hitch I recommend for a 2023 Hyundai Tucson is the Curt Trailer Hitch Receiver part #C94WR which I confirmed as a fit with Curt for all models, including the Hybrid. This trailer hitch features a bolt-on installation so there is no…

view full answer...

2008 Winnebago View Screen Door Latch Right Hand Side

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching