Replacement Parts For Westin Molded Lighted Running Boards On 2005 Ford F-350 King Ranch

Question

Question:

2005 F350 King Ranch Running Board Lens 4each Light Bulb Socket 4each Please Advise

asked by: Ruben A

0

Expert Reply:

If you have the Westin Molded, Lighted Running Boards # 27-0025-1215 on your 2005 Ford F-350 King Ranch you will need Replacement Lenses And Housings # 27-9904, and the Replacement Light Housings # 27-9902.

If you have different running boards on your vehicle just let me know and I would be happy to recommend the parts you are looking for.

expert reply by: Samuel C

0

Answer 1

Like the Custer Rubber Grommet #G65G, all the oval grommets we currently carry will be designed to fit a 6-1/2" light, like the Optronics LED Trailer Tail Light #STL72RB. However, we do have the Replacement Lenses and Housings #27-9904,…

view full answer...

Answer 2

The Westin LED Light Kit, #27-6000, is designed for use with the Westin Sure-Grip running boards. Part #27-9904 that you mentioned is a set of replacement lenses and housings for molded, lighted running boards. The molded running boards are not the…

view full answer...

Answer 3

As long as you've got the Westin Molded, Lighted Running Boards w/ Custom Installation Kit - 6" Wide - Black #27-0015-1325, which is the confirmed model of these lighted running boards for your 2002 Sequoia, then the Replacement Lenses and…

view full answer...

Answer 4

Its hard to say for sure what will and will not work for you due to not knowing what running boards you have, however the : -Replacement Lenses and Housings for Westin Molded, Lighted Running Boards #27-9904 does sounds like what you're looking…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

Here is the wiring diagram from SeeLevel for the Monitor #SE94VR. I hope this helps you clear things up and get it working.

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

You are correct that this refrigerator does not have an ON/OFF switch or function. The best you can do is "Standby" that draws an unknown amount of power. One option is to pull the 12-Volt fuse at the RV power center. A much better option…

view full answer...

Replacement Parts For Westin Molded Lighted Running Boards On 2005 Ford F-350 King Ranch

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching