Rhino Rack Roof Rack that Attaches to Thule Tracks on Leer Camper Shell

Question

Question:

Is the rack for a pickup cap compatible with a Thule cap mount included with the LEER cap I have. Thank you

asked by: Scott H

0

Expert Reply:

Since your Leer camper shell has a set of Thule roof tracks installed on it you'd actually want the Rhino Rack Roof Rack part # Y02-490B-NT which was designed to attach to those top channels. The kit you mentioned was designed to attach to a roof by drilling into it and attaching in that manner.

expert reply by: Jameson C

0

Answer 1

The Rhino-Rack Aero Bar Roof Rack for Camper Shells #Y02-490B that you referenced actually comes with the tracks so since you already have Thule tracks on your Leer truck cap you need part #Y02-490B-NT instead.

view full answer...

Answer 2

No, you cannot cut the crossbars on the Rhino-Rack Roof Rack for Thule and Yakima Tracks #Y01-140B-NT down to size. The channels on the bottom under the crossbar do not run all the way down the bar, so cutting them could impact the mounting points.…

view full answer...

Answer 3

The Rhino-Rack Aero Bar Roof Rack for Camper Shells - Track Mount - Black - Standard - 59" Long #Y02-490B is a universal roof rack and can be adjusted to fit various camper shells. The track length is 63" on this roof rack but they…

view full answer...

Answer 4

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 5

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 8

The Rhino-Rack Roof Rack for Factory Tracks #Y02-490B-NT is going to be your best bet for the tracks on the ARE topper for your 2012 Toyota Tacoma. The weight capacity is 220 lbs like you mentioned, but that's going to be the highest you'll…

view full answer...

Answer 9

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 10

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Answer 11

Thanks for all the details! We definitely have a way to get a cargo basket and an awning installed on your 2024 Toyota Highlander, although the aftermarket roof rack systems will use a clamping system with your door jambs instead of mounting via…

view full answer...

Answer 12

Yes, the Roamer LT Roof Rack for Pop-Up Campers and Camper Shells #S80510 will fit your 2023 Forest River Flagstaff 176LTD. It is also what I recommend to add a roof rack for a bicycle carrier on your camper. Once installed you will be able to add…

view full answer...