Hub Recommendation for an Old Mobile Home Axle
Question:
i need 4 trailer brake hubs with 6 stud pattern to put on my old stile mobile home axles my axles measure inner bearing ID 1.75 outer bearing ID 1.25 hub brake id 12 hub brake depth 2 the break hub mag contact plate is full circle and floats
asked by: Steve H
Expert Reply:
It sounds like you have found the correct hub and drum assembly. The Trailer Hub and Drum # AKHD-655-6-K that you referenced recommends inner bearing 25580 and outer bearing 15123 which are the exact measurements you gave. Also, this hub has a 12 inch diameter and a 2 inch depth like what you said you needed.
For the correct bearing and seal kit you would want a Bearing Kit # BK3-100.
I attached a video on cleaning and replacing hubs and bearings for you to check out also.
Products Referenced in This Question
Bearing Kit, 15123/ 25580 Bearings, 10-36 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing 15123 and 25580
- Race 25520 and 15245
- 6000 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- 25580
- 15123
- For 5200 lbs Axles
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 4-1/2" Center
- Shop: Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles - 12" - 5 Spoke Utility
- Shop: Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 7-3/4" Long - 9/16" Center Hole
- Q&A: Replacing Mobile Home Trailer Hub With a Hub that is Compatible with Standard Rims and Tires
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Search Results: 44649
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Q&A: Recommended Dexter Suspension Kit 7753400
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: 68149
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Brake Controller
- Q&A: Location of the 40-Amp Fuse for the 2006 Chevrolet Silverado Tow Package
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Search Results: 25580
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Fifth Wheel Hitch
- Article: Most Popular Wheel Bearings
- Shop: Grease Seals 10-36 (pair)
- Q&A: Options for Adding Interior Lighting to Enclosed Cargo Trailer
- Search Results: dust cap
- Article: Trailer Tire Sizing
- Search Results: equalizer
- Shop: Suspension Enhancement
- Shop: Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Video: Choosing the Right Trailer Wiring
- Q&A: Fuse Location for Trailer Brake Controller on a 2005 Chevy Silverado
on Trailer Hubs and Drums
