What is Difference Between Furrion Tankless Door Sizes

Question

Question:

how do i measure the water heater door i want to replaCE MY water heater with the furrion tankless do i measure the acutal door itself or the door and the frame?

asked by: John

0

Expert Reply:

We have three Furrion access door replacements for their tankless water heaters. We have the 18 by 18 inch part # FR73FR, the 16 by 16 inch # FR43FR, and we have the 16 by 18 inch # FR63FR.

For the water heaters that match the door size we have the # FR98SR which has a 16 by 16 inch door, the part # FR68SR with is 18 by 18, and we have the # FR48SR which is 18 by 16.

The door size to go with comes down to what will work best on your RV as the rest of the assembly is the exact same.

expert reply by: Jameson C

0

Answer 1

The Dometic RV Water Heater - Gas - Automatic Pilot - 12 Volt - 8,800 Btu - 6 Gal Tank Item AT96121 is the direct replacement for the GC6AA-10E. Unfortunately it is out of stock with no expected restock date. Instead I recommend the Furrion RV…

view full answer...

Answer 2

Yes the Furrion RV Tankless Water Heater - Gas - Automatic Pilot - 60,000 BTU - 16" x 18" Door #FR48SR is a great replacement for an Atwood GC6AA-10E. It does have slightly smaller dimensions so your cutout hole will need a little bit of…

view full answer...

Answer 3

So long as you have the appropriate cut out size, you can replace your Atwood GC6AA-10E with the Furrion RV Tankless Water Heater #FR93FR. The Atwood heater measures 12-1/2" tall x 16" wide x 18" deep while the Furrion measures…

view full answer...

Answer 4

What you will need to do - if possible - is re-size the opening in your RV for the door to the Furrion RV Tankless Water Heater - Gas - Automatic Pilot - 60,000 BTU #FR93FR. The reason for that is the smallest available is the 16" x 16"…

view full answer...

Answer 5

We have checked with Atwood and can confirm for you that the Replacement Black Door #AT91507 or white #AT91386 are a confirmed fit for your 6 gallon Atwood GC6AA-10E water heater.

view full answer...

Answer 6

The dimensions I can find online for a GC6AA-10E show it needing a 16" x 16" door, but there are plenty of outliers out there that can require different sized doors so it's best to measure what you current have and then find the…

view full answer...

Answer 7

The #FR93FR, FWH09A-AM, FWH09A-1-A are all the same Furrion Tankless Water Heater. since you're wanting to reuse the door and wall controller you'll want the #FR93FR to save yourself the money on the door. It will however still come with the…

view full answer...

Answer 8

We do carry the Dometic RV Water Heater #DMC74FR which you could use to replace your Atwood G6A-8E 6 gal RV Water Heater, but I highly recommend switching over to a tankless system like the Furrion RV Tankless Water Heater 60,000 BTU #FR98SR. This…

view full answer...

Answer 9

According to my research your Girard GSWH-2 tankless water heater measures 12-1/2" wide x 12-1/2" tall x 15-1/2" deep and the Furrion RV Tankless Water Heater #FR68SR measures 12-5/8" wide x 12-5/8" tall x 19-1/4" deep…

view full answer...

Answer 10

Yes, the only difference is that the #FR98SR comes with the 16" door. With the #FR93FR you can select one of three doors: small 16" X 16" #FR43FR, medium 16" X 18" #FR63FR, and large 18" X 18" #FR73FR. This will be…

view full answer...

Answer 11

Because the G6A-8E has been discontinued, the Furrion Tankless Water Heater, #FR98SR is my suggestion. This is of similar size but provides unlimited, as long as you have propane, hot water. This has a vortex system that mixes hot and cold water to…

view full answer...

Answer 12

The two part numbers you are looking at are the same units. One is the manufacturers (FS06B1) and the other is ours #LSB64FR. When it comes to the opening size that you need to install this hot water heater, we state that you need a 13" wide x…

view full answer...