Does AirBedz XUV Air Mattress For 2021 Toyota Sienna Match Angle of Floorboards

Question

Question:

I want to ask about a vehicle mattress, item#341031, for 2021 Toyota Sienna minivan. The floor contours upwards towards the rear to accommodate the hybrid battery. My question: Is the bottom of the mattress tapered to level out the top of the mattress?

asked by: C. A

0

Expert Reply:

The AirBedz XUV Air Mattress with Built-In Rechargeable Battery Air Pump # 341031 that you referenced is a fit for all models of your 2021 Toyota Sienna but does not have any taper built into it to match the floor board angle you mentioned.

expert reply by: Jameson C

0

Answer 1

The AirBedz Rear Seat Air Mattress w Portable 12V Pump #341033 is for the rear seat of your 2022 Toyota Sienna. The videos that we have on this air mattress so far are on CUVs like the Toyota Highlander and it fits the second-row seating on those…

view full answer...

Answer 2

I spoke with my contact at Timbren about the compatibility of the two systems, and he said that as long as the Timbren Rear Suspension Enhancement System #TDVRRT and the shock absorbers don't occupy the same space they will work great together.…

view full answer...

Answer 3

The Timbren Vehicle Suspension, part #TDVRRT should work well on your 2014 Dodge Grand Caravan. These are used to help reduce sag when carrying heavy cargo or when towing a trailer that is causing the rear of the vehicle to sag. These are designed to…

view full answer...

Answer 4

Basically, rubber springs are ideal for vehicles that carry the same load frequently, like towing a pop up camper. Air springs are better for trucks that carry different sized loads and thus have to level the bed side to side. As far as longevity,…

view full answer...

Answer 5

My contact at AirBedz advised their XUV Air Mattress with Built-In Rechargeable Battery Air Pump #341031 measures 52-inches wide at the wider end and 43-inches at the narrower end where the air pump is located. Please refer to the photo I made for…

view full answer...

Answer 6

The Timbren suspension system, #TDVRRT, fits inside of the coil springs on your 2010 Chrysler Town and Country. You will remove the old bump stops from this location and insert the Timbren system in their place. I have included a link to the…

view full answer...

Answer 7

The Timbren Rear Suspension Enhancement System #TDVRRT on your 2012 Dodge Grand Caravan do ride close to the axle, but your photo seems closer than normal. We have had some folks mention that when unloaded the Timbren springs ride pretty rough and…

view full answer...

Answer 8

According to Timbren, the unneeded weight would include passengers and cargo, but not the weight of the fuel. To see the install details, click on the provided link.

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Does AirBedz XUV Air Mattress For 2021 Toyota Sienna Match Angle of Floorboards

Product Page this Question was Asked From

Continue Researching