What Size Rivets Does Rhino Rack RT Style Track Use

Question

Question:

do you sell the pop rivets separate mine are loosening up

asked by: Paul S

0

Expert Reply:

While we don't offer the replacement rivets needed with the # RTS502 we do know that the size is 1.6mm - 6.3mm rivets which is a common size you could find locally.

expert reply by: Jameson C

0

Answer 1

For a permanent roof rack installation, the Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 58-1/2" Long - Qty 2 #RTS502 can be used. Then you will want the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack…

view full answer...

Answer 2

Yes. You can cut the Yakima 60" Tracks for Roof Racks #Y01135 down to the size you need them and still use the end caps. You'll need to either cut them down to a size that still leaves the pre-drilled holes close enough to connect…

view full answer...

Answer 3

Hey Alex, it sounds like you are looking for just the tracks of the Rhino Rack camper shell roof rack kit #Y02-480B which we do offer with the part #RTC16.

view full answer...

Answer 4

Thanks for reaching out, Joe! I recommend using the Rhino-Rack Aero Bar Roof Rack for Camper Shells #Y02-480B which comes with 63" long tracks as well as 54" long crossbars which should give you a little bit of overhang on your…

view full answer...

Answer 5

You can use rivet-mounted tracks to install a Rhino-Rack roof rack on your 2020 Winnebago View 24V motorhome, I'd just recommend paying special attention to sealing the roof where the rivets are. What you need first are the tracks, and with such…

view full answer...

Answer 6

Since your factory roof tracks are removed, you will need a complete roof rack kit that includes the roof tracks. I think your best option is to go with Rhino-Rack Aero Bar Roof Rack #Y02-480B.. This kit includes 63" long tracks that will be…

view full answer...

Answer 7

We do have the Rhino Rack track mount roof rack you are searching for. It is made up of three parts, the Rhino-Rack RT-Style Roof Rack Tracks #RRRTV148, the Track Mount RLTP Legs #RLTP, and the Rhino-Rack Heavy-Duty Roof Rack Crossbar #RB1250B.

view full answer...

Answer 8

The Rhino-Rack Aero Bar Roof Rack for Camper Shells part #Y02-480B is a great option for fiberglass truck bed campers as it was made for this exact purpose. It can support up to 220 lbs but bear in mind this rating is tested independently of the…

view full answer...

Answer 9

Your Yakima Landing Pad 1 part #Y00221 is the correct Landing Pad for the Yakima Tracks like the part #Y64MR that you referenced.

view full answer...

What Size Rivets Does Rhino Rack RT Style Track Use

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching