Which Brake Assemblies Come with the Dexter Trailer Axle 8327834
Question:
Where can I find just the brakes from below? Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 8 on 6-1/2 Bolt Pattern - 95 - 7,000 lbs Item # 8327834-EB
asked by: Parker B
Expert Reply:
The Dexter Trailer Axle with Electric Brakes and EZ Lube Spindles # 8327834-EB uses electric brakes # 23-180 (left hand side) and # 23-181 (right hand side). These are manual adjustment brakes so you may also need the Brake Adjustment Spoon for Drum Brakes # W80630 and if you need to replace the brake mounting hardware you'll also need # BRKH12.
If you wanted a self adjusting brake set, the # AKEBRK-7-SA would also work to replace those brakes and do a great job. They're going to be a much easier for installation and maintenance from the standpoint of not needing any adjustment after they're installed.
I've linked an installation video and some part review videos of these that you also might be interested in.
Products Referenced in This Question
Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 7,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 7000 lbs
- Brake Assembly
- Manual Adjust
- 12 x 2 Inch Drum
- Dexter
more information >
Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 7,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 7000 lbs
- Brake Assembly
- Manual Adjust
- 12 x 2 Inch Drum
- Dexter
more information >
etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 12 x 2 Inch Drum
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- etrailer
more information >
Mounting Bolts and Hardware for 12" Brake Assemblies
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Hardware
- 12 Inch
- Bolts
- Redline
more information >
Brake Adjustment Spoon for Drum Brakes
- Accessories and Parts
- Trailer Brakes
- Hydraulic Drum Brakes
- Adjuster
- Brake Adjuster Tool
- Performance Tool
more information >
Product Page this Question was Asked From
Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 8 on 6-1/2 Bolt Pattern - 95" - 7,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Electric Brakes
- 7000 lbs
- 8 on 6-1/2 Inch
- 80 Inch Long
- 95 Inch Long
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: Will Roadmaster Comfort Ride Suspension Kit Work on 2019 Fuel 335 Toy Hauler
- Article: Trailer Wiring Diagrams
- Q&A: Installing Aftermarket Brake Controller on a 2012 GMC Sierra 3500 with ITBC
- Q&A: Correct Bearing Kit for 2019 Jayco North Point 315RLTS
- Q&A: Troubleshooting Intermittent Trailer Disconnected Message with Factory Brake Controller on Ford
- Q&A: U-Bolts For Roadmaster Comfort Ride For 8,000 lb 3 Inch Axles
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Replacing Trailer Buddy 32220 Reverse Solenoid on Ranger Boat Trailer
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: How to Measure a Trailer Axle
- Q&A: How Much Travel Does The Roadmaster Comfort Ride Leaf Spring Suspension Kit # RM-2460-2580 Offer?
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: My Trailer Hitch Doesn't Fit