Availability Of Trailer Idler Hub With 5 on 5 Bolt Pattern
Question:
Do you carry a 5.5 Bolt circle hub with a OD of approximitly 7in
asked by: Christian
Expert Reply:
Currently the only trailer hubs we offer with a 5 on 5 bolt pattern are the Trailer Idler Hub Assembly for 3,500-lb Axles # AKIHUB-550-35-K, and the Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles # AKIHUB-550-35-EZ-K which both have an outer diameter of 6-1/4".
Both of these hubs are designed for spindles that use inner bearing # L68149 and outer bearing # L44649. To confirm that these hubs will fit your spindles you will want to remove one of your current hubs and verify that the bearings used match the above bearings.
The two ways to do this is to look for the bearing number stamped on the bearing like shown in the included picture of the # L44649, or you can use digital calipers like # PTW80157 to precisely measure the spindle according to the included diagram.
For this hub to be compatible the inner bearing section of the spindle will need to measure 1.378", and the outer bearing section will need to measure 1.063".
I included videos for each of the products mentioned for you to take a look at.
Products Referenced in This Question
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 5 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 5 Inch
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 5 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 5 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased
- Video: etrailer Trailer Idler Hub Assembly Review and Installation
- Search Results: 5x5 hub
- Search Results: lubricants sealants adhesives
- Video: Review of etrailer Trailer Hubs and Drums - Pre Greased Idler Hub - AKIHUB-550-35-K
- Shop: Loadstar ST205/75D15 Bias Trailer Tire w/ 15" Silver Mod Wheel - 5 on 5 - Load Range C
- Shop: Kenda Karrier ST205/75R15 Radial Trailer Tire w/ 15" Silver Mod Wheel - 5 on 4-1/2 - LR D
- Q&A: What Will be the Right Tire Pressure for Load Star ST205/75R15
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Wiring
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Video: Performance Tools Bearings, Races, and Seals Installation Set Review
- Search Results: races
- Search Results: tire tools
- Search Results: trailer bearings races seals caps
- Search Results: specialty tools
- Search Results: tools
- Q&A: What is the Hole Spacing for Mounting etrailer 10 Inch Hydraulic Trailer Brake # AKUBRK-35L-D
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Video: Review of Ultimate Jack Trailer Jack - A-Frame Jack - 322-RDJ-2K
- Video: Bright Way Push-to-Test Trailer Breakaway Kit Review and Installation 3802308
- Video: Ultimate Trailer Jack A-Frame Topwind Jack Review
- Q&A: Do all 3,500 lb Trailer Axles Have the Same Bearings
- Q&A: Measurements Needed to Determine Replacement Bearings Without Having Old Bearings Numbers
- Q&A: Picking Out Bearing Kit for Trailer with 2,000 lb Axles
- Q&A: Parts Needed To Switch a 3,500LB Axle To 5 on 5" Idler Hubs on 5X8 Utility Trailer
- Q&A: Hubs with 5 on 5 Bolt Pattern that Will Fit a Timbren Axle-Less Suspension System