Can Redline Disc Brake Pad & Lining Be Used In Kodiak Calipers

Question

Question:

Will a BP04-400 brake pad cross with a dbc-2250-crm-pad brake pad?

asked by: Cody B

0

Expert Reply:

I reached out to my contact at Redline and he mentioned that the Disc Brake Pad & Lining # BP04-400 that you were looking at will not work on your Kodiak Brakes.

The reason for this is that even though the pads do look very similar, there are subtle difference regarding how the pad is retained inside of the caliper, making the Kodiak calipers only accept Kodiak pads.

You will need to use the Kodiak Ceramic Brake Pads # K2250CP that you were looking at as long as you have 8000lb-14000lb Kodiak calipers.

expert reply by: Samuel C

0

Answer 1

Though I am not aware of a retrofit for your Hayes 10,000 pounds axle brake parts, we do actually have direct replacements. I have the left and right side calipers as well as the brake pads listed below. Redline AL-KO/Hayes Disc Brake Caliper -10,000…

view full answer...

Answer 2

For replacement caliper shoulder bolts for the caliper part #BP18-050 you'd want the part #BP18-105 and you'd be set.

view full answer...

Answer 3

I attached a chart that has the automotive cross reference for the Kodiak disc brake pads part #K2250CP that you referenced under the yellow heading. Probably the easiest to look up would be 1982 to 1992 Chevy Cavalier.

view full answer...

Answer 4

The Kodiak Ceramic Brake Pads #K2250CP are not shown on the cross reference chart you mentioned, but if you have the DBC-2250 calipers, these brake pads will work as a replacement. Check out the video linked below for more details on this product. If…

view full answer...

Answer 5

The "KTC 7600" stamped on the brake pad doesn't look to be a part number, so I can't cross reference it, but we do know you have Kodiak ceramic brake pads. So to determine the correct brake pads, all you need to do is match up…

view full answer...

Answer 6

We do not have a Kodiak disc brake caliper cross reference to automotive calipers but for the brake pads there are cross referenced parts. If you refer to the linked image you'll see a partial list of cross-compatibility of brake shoes for GM…

view full answer...

Answer 7

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 10

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 11

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 12

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Can Redline Disc Brake Pad & Lining Be Used In Kodiak Calipers

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching