Which B and W Biker Bar Fits Harley Davidson Softail and Touring Model

Question

Question:

which biker bar would fit both touring and softail

asked by: Alan M

0

Expert Reply:

For the Harley Softail the correct B and W Biker Bar is the part # BWMC2302 then for a Touring model you'd want the part # BWMC2301. There isn't a single model that fits both due to differences between the bikes.

expert reply by: Jameson C

0

Answer 1

The B&W Biker Bar Motorcycle Tie-Down System for Trailers #BWMC2301 and #BWMC2303 will use the same base so will attach to the trailer the exact same way, but it is the actual bar that attaches to the frame of the bike that will be different. The…

view full answer...

Answer 2

The 3/4" plywood floor will be thick enough to install the B&W Biker Bar Motorcycle Tie-Down System #BWMC2301 and use with your Harley Touring. If you take a look at the accompanying cutout of the directions I added, it states "The…

view full answer...

Answer 3

I spoke with our resident Harley guy about what he thought of the B&W Biker Bar Motorcycle Tie-Down System for Trailers #BWMC2301 if he were to use it with his bike. Since the bike frame is designed to support not only its own weight but also the…

view full answer...

Answer 4

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 5

I have a solution for you, but there is not an adapter that will allow you to mount the B&W Biker Bar #BWMC2301 to an e-track setup on a trailer. The Biker Bar does come with mounting plates/anchors that are mounted on the underside of your…

view full answer...

Answer 6

The TruRyde Spindle Nut #165686 has an outer measurement of 1.45 inches. You will use a 1-1/2 inch socket on this castle nut or we usually use a channel lock for these installations. I've attached a video of an installation of a hub to assist.…

view full answer...

Answer 7

The Replacement Bar for B&W Biker Bar Motorcycle Tie-Down System #BWMC2302B is the replacement bar that fits H-D Dyna, Softail, and V-Rod bike frames. The #BWMC2301B is the Replacement Clamping Bar for B&W Biker Bar Motorcycle Tie-Down for…

view full answer...

Answer 8

First of all that's a pretty sweet looking bike! Secondly, while there are no B&W Biker Bar systems specifically designed for your Indian Chieftain, you still might be able to utilize the Tie-Down System #BWMC2301. I've attached a photo…

view full answer...

Answer 9

Because the B&W Biker Bar #BWMC2301 is height adjustable, it provides you with the ability to move the bar up or down in 1/4" increments. It looks like the lowest setting is 3-3/4" and the highest setting is 6-1/2" inches-so if…

view full answer...