3 inch to 2 inch Hitch Adapter for Use with Weight Distribution

Question

Question:

I am looking for a 3 inch to 2 inch reducer that will work with my 2020 F-350 dually and an e2 spring bar weight distribution hitch. My camper is very light weight and weighs 7400 fully loaded.

asked by: Scott S

0

Expert Reply:

For a 3 inch hitch to 2 inch hitch adapter we have the part # 337RTA302. This will work great with your Fastway weight distribution system.

expert reply by: Jameson C

0

Answer 1

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 2

Hey Jay. It sounds like you are on the right track here because a sidewinder pin box will be your only option for pulling your 5th wheel since you have a short bed truck with the Rambox. That said, you are right that the Reese Sidewinder cannot be…

view full answer...

Answer 3

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Answer 4

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 5

So for your set up, a 2021 Ram 2500 short bed with the RamBoxes, you will need to use a Sidewinder in order to have the clearance to tow a 5th wheel. The Goose Box doesn't move the pivot point and an offset ball just won't be enough for…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

As the Buyers Products Plain Receiver Tube 2-1/2" I.D. x 12" Long #337RT255812 is a fabrication part, the tongue weight capacity will depend on the other parts used and what it will be installed on. Due to this, it does not carry a specific…

view full answer...

Answer 8

The Draw-Tite Front Mount Trailer Hitch Receiver #65076 will fit your 2023 Ford F-350 dually. It features a bolt-on installation and has a 2" receiver. The hitch has a 9,000 lb line pull, 500 lb vertical load, and 5,000 lb gross trailer weight.…

view full answer...

Answer 9

Yes, there is a front mounted hitch for your 2022 Ford F-350 dually with a diesel engine. It is the EcoHitch Hidden Front Mount Trailer Hitch Receiver item #EH83GR. This hitch is custom fit and bolts to your Ford with included hardware. This front…

view full answer...

Answer 10

The outer tube dimensions of the Buyers Products Black Receiver Tube #337RT25818B are 2-1/2" x 2-1/2" square. The length of the tube is 18" long.

view full answer...

Answer 11

For your 2 inch tongue the Channel Tongue Trailer Coupler - Trigger Latch - Zinc - 2" Ball - Bolt On - 3,500 lb #CT-3001-Z is my recommendation. Then I'd use the Fulton Fold-Away Coupler Hinge Kit for 2" x 3" Trailer Tongue - Bolt…

view full answer...

Answer 12

I do have a way for you to use your Avail tow bar with a 3-inch hitch receiver, however, there are no replacement shanks that fit a 3-inch hitch receiver. All you need to use a tow bar that fits a 2-inch hitch receiver in a 3-inch hitch receiver is…

view full answer...

3 inch to 2 inch Hitch Adapter for Use with Weight Distribution

Product Page this Question was Asked From

Continue Researching