Recommended Tailgate And Bed Mat For 2007 Ford Ranger

Question

Question:

is theDZ86700 for just the bed of the Ford Ranger ? not the Tail Gate?

asked by: Harold

0

Expert Reply:

The DeeZee Universal Truck Tailgate Mat # DZ86700 is only for the tailgate and does not include the mat for the bed. This will work on your 2007 Ford Ranger as long as it has the 6' non standard bed.

If you are also looking for the bed mat I recommend the DeeZee Custom-Fit Truck Bed Mat # DZ86718 which will also fit on your 2007 Ford Ranger as long as you have a 6' standard bed.

I included videos for both of the products mentioned for you to take a look at.

expert reply by: Samuel C

0

Answer 1

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Your 2024 Chevrolet Silverado 3500 will come with a 2-1/2" trailer hitch receiver. If your truck did not come with a reducer for a 2" receiver we do have the B&W #BWRHXA2182 if you need to use your 2" ball mount or hitch mounted…

view full answer...

Answer 4

The Torklift Hitch Extension part #TLE1636 that you referenced can tow a trailer that weighs 6,700 lbs like you what you have but you would need to use a weight distribution system with it to have the needed capacity as without a WD system it's…

view full answer...

Answer 5

The outside diameter of the fitting of the #RE64FR drain tube is 7/8 of an inch. You can see a product description video for the drain tube by clicking the provided link.

view full answer...

Answer 6

Yes it is. The Black Armour Heavy-Duty Custom Truck Bed Mat item #BA67AR does come in two parts. This mat is confirmed to fit the 8' bed length of the 2022 Ford F-250. We do have a one piece option for a custom fit rubber bed liner for your…

view full answer...

Answer 7

The DeeZee Universal Truck Tailgate Mat part #DZ86700 installs via screws which are attached by drilling into the tail gate as you can see in the attached photo. The DeeZee Universal Truck Tailgate Mat won't contour to the indents in the tail…

view full answer...

Answer 8

I would be happy to help. On the bottom of the hitch ball will be a plastic or aluminum plug. Remove the plug and you will see a bar inside that is used to hold the bearings in place. You will need to rotate the bar 90 degrees to release the…

view full answer...

Answer 9

Yes, you can still install the Timbren Springs #TFRTT350F on your 2013 Ford F-250 without the raised stop like you have seen in the images you found. I have included an image below which shows their other Kit #TFR250SDG for your F-250 on a truck…

view full answer...

Recommended Tailgate And Bed Mat For 2007 Ford Ranger

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching