Which Sidewinder Wedge Fits Demco Fifth Wheel Hitches

Question

Question:

Is there a specific wedge that fits this 5th wheel or do I need the universal plate?

asked by: Clint K

1

Helpful Expert Reply:

For Demco fifth wheel hitches like the part # DM6076SL-FLAT the correct Sidewinder wedge is the part # RP74FR.

expert reply by: Jameson C

1

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

The Draw Tite hitch mounted spare carrier part #6715 would work great for you. It is compatible with the wheel bolt pattern you have of 6 on 5-1/2 inch and can be used in the hitch of your Grand Design Reflection.

view full answer...

Answer 5

The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept a…

view full answer...

Answer 6

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 7

Hello Evan. I do have a solution for you, but I am afraid we do not offer a product that will fit your exact description. We do offer a few 7-way extensions that could potentially be used. Something like the TorkLift Wiring Harness Extension…

view full answer...

Answer 8

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 9

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Which Sidewinder Wedge Fits Demco Fifth Wheel Hitches

Products Referenced in This Question

Continue Researching