Replacement Wheel for my Yakima Rack and Roll Trailer  

The Spare Tire with 5 Spoke Rim for Yakima Rack and Roll Trailer #Y08121 has wheel dimensions of 16" diameter x 1.85" wide and tire dimensions of 16" diameter x 3.25" wide. This is the tire #Y8880282 you referenced with inner tube…

Hey Richard, thanks for reaching out! The Dexter DX7.5 Drop-N-Go Brake Actuator #099-175-00 is a great option for a replacement actuator because it's a direct replacement for the common Model 60 actuators that were popular in the '90s.…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Yes, if you inserted a rod into the hole that in front of the housing of the actuator of the part #DM72VR that would work as a manual lock out and allow you to reverse the trailer.

You would need to take one measurement to determine if the hitch adapter part #e93YR would fit your 2010 Honda Civic. You would need to measure from the center of your hitch pin hole out to the outer edge of your bumper. If that dimension is less…

The Yakima Rack and Roll Trailer #Y08107 referenced in your question can be easily folded for storage in numerous positions, however the wheels themselves cannot fold flat. The wheels though can be easily removed along with folding the trailer to…

The Yakima part number #Y08111 is just the crossbars of Yakima Rack and Roll trailer which the correct size trailer for these 78 inch bars is the part #Y08107. This trailer would be able to accommodate both an e-bike and a trike.

You'd only need to adjust the Heavy Duty Shocks for Yakima Rack and Roll Trailer #Y08110 if you're hauling a heavy load that is causing your shocks to bottom out. These shocks have 4" vertical adjustability to combat that, so you'd…

I checked with Yakima and they told me to have to have you clean and lubricate the bushing and then try to pull it off with a pair of pliers. Force isn’t an issue because if they can’t get the bushing off we will need to replace the trailer side…

Yes, for the B&W Tow & Stow, I recommend the Trailer Hitch Receiver Lock for 2", 2-1/2", and 3" Hitches #C23025.

Both the Yakima Rack and Roll Trailer #Y08107 and Malone MicroSportXT Trailer #MPG460XT will work for you to carry your two Hobie kayaks, but I recommend the MicroSport XT because it is the better value of the two trailers. The biggest difference…