Availability of Wireless Backup Camera That Can Display on Smartphone

Question

Question:

Do you make a back up camera that plugs into the trailer light plug that is also cordless - maybe Bluetooth that connects to my smart phone?

asked by: Doug M

1

Helpful Expert Reply:

We have a wireless backup camera that will display on a smart phone with the Rampage part # RA7710 which uses a rechargeable battery for power but we do not have anything that connects to a trailer connector. This uses a wifi connection that it provides to communicate with your phone.

I attached a review video for this for you to check out as well.

expert reply by: Jameson C

1

Answer 1

While there are observation systems that have multiple cameras, there isn't one at this time that has multiple cameras which all sync to a single smartphone or tablet. The Rampage Wireless Backup Camera for Smartphone or Tablet - iOS or Android…

view full answer...

Answer 2

According to Rampage Products, the maximum transmission distance between the camera and wireless phone is a pretty staggering 300 feet. My Rampage representative tells me he's routinely used the Rampage Wireless Back Up Camera #RA7710 on the back…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 5

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 6

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 7

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 8

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 9

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 10

To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…

view full answer...

Answer 11

The AL-KO trailer hub part number 8700 that you have is a 3,500 lb trailer hub/drum with a 5 on 4-1/2 inch bolt pattern. Based on that the #AKHD-545-35-EZ-K is the correct fit and would work great.

view full answer...

Answer 12

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Availability of Wireless Backup Camera That Can Display on Smartphone

Featured Help Information

Miscellaneous Media

Continue Researching