Does Buyers Products Pintle Hook Mount 337PM25812 Fit Pintle and Mounting Kit # 33710057

Question

Question:

I am wondering will this pintle hitch Buyers Products Pintle Hitch - 33710057 fit on this mount Buyers Products 3 Position Pintle Hook Mount for 2-1/2 Receiver - 20K Item # 337PM25812

asked by: Luke H

0

Expert Reply:

Yes the Buyers Products 10 Ton Combination Hitch with Mounting Kit # 33710057 does fit the Buyers Products 3 Position Pintle Hook Mount for 2-1/2" Receiver # 337PM25812.

expert reply by: Jameson C

0

Answer 1

Yep, you can absolutely use the Buyers Products 3 Position Pintle Hook Mount for 2-1/2" Receiver #337PM25812 in the rise position instead of the drop position. This is a 20k mount that will go perfectly with a pintle hook like the Curt…

view full answer...

Answer 2

Yes, you can definitely use the Curt Pintle Hook Mounting Plate #C48349 in both the drop and rise positions to achieve a level towing setup. If you'd like a new pintle hook then we have the Curt #C48210 which comes with it's own set…

view full answer...

Answer 3

The mounting holes on the Curt SecureLatch Pintle Hook #CU97FR are spaced 1-3/4" apart vertically and 3-3/8" horizontally on center. I have an alternate solution with the information you requested as when I spoke to Curt they said…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 11

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 12

I spoke to Demco about the Demco Autoslide Locking Plate for Lippert Rhino Pin Boxes part #DM76FR, the side plates are supposed to be angled as that's what provides the clamping force. I would just make sure you have the bolts torqued fully to…

view full answer...

Does Buyers Products Pintle Hook Mount 337PM25812 Fit Pintle and Mounting Kit # 33710057

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching