Recommended Replacement Thrust Bearing For 5000lb Trailer Jack

Question

Question:

Hello, Im looking for a 5,000 lbs trailer jack trust bearing. I see you have several but Im not sure which one I need. The dimensions of the product are: - inner diameter 25mm or 5/8 - outer diameter 32mm or 1 1/4 - height 7/16 Thank you

asked by: Michael T

0

Expert Reply:

Thank you for the measurements of your current bearing!

Based on your measurements you need the Replacement Thrust Bearing for 5,000-lb Capacity Bulldog Jacks # BD500223 which has an Inner Diameter of .525", an Outer Diameter of 1.25", and a thickness of .43".

I included a video of the Replacement Thrust Bearing # BD500223 for you to take a look at.

expert reply by: Samuel C

0

Answer 1

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 3

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 4

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 5

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 6

That's a good question, and we can definitely point you in the right direction for Firestone air bags on your 2021 Ford F-250 Super Duty. The weight ratings are exactly what you said, the amount of weight it can assist up to; so when towing a…

view full answer...

Answer 7

We do - for your 2023 Ford F-350 you'll want the TorkLift StableLoad Suspension Upgrade w Quick-Disconnect #TL89CR.

view full answer...

Answer 8

Thanks for reaching out, Bill! I definitely see your concerns about the TorkLift StableLoad Suspension Upgrade w Quick-Disconnect #TL89CR for your 2022 Ford F-350, but I hopefully I'll be able to put your mind at ease even though we don't…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Recommended Replacement Thrust Bearing For 5000lb Trailer Jack

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching