High Pressure Propane Hose With 3/8" Female NPT And 3/8" SAE Flare Swivel

Question

Question:

Is this a high pressure hose? Do you have this same hose in braided? High pressure

asked by: Jim

1

Helpful Expert Reply:

The Propane Hose - 3/8" Female SAE Flare Swivel x 3/8" Female NPT - 2' Item # 37207-30985 is going to be a high pressure hose but unfortunately we do not offer that hose in the braided option.

expert reply by: Shane H

1

Answer 1

We do offer frame-mount trailer hitches for RVs and these are available in either bolt-on or weld-on varieties. You can click on the included link to see all such items, such as the Curt #C13701 that carries a 500-lb tongue weight (TW) rating and a…

view full answer...

Answer 2

The Dometic 320 Full-Timer RV Toilet - Standard Height - Elongated Bowl - White Ceramic #DOM87FR has an overall width of 14-3/4 inches it is 21-3/4 inches long and 19-1/4 inches tall with a rough in measurement of 11 inches. This unit is an exact…

view full answer...

Answer 3

I would stick with a roll-up tonneau cover. A tri-fold option may not be able to access your 5th wheel hitch without folding it completely. A roll-up tonneau cover, or retractable, is preferable because you can still access the B&W 5th wheel…

view full answer...

Answer 4

The Pace Edwards Switchblade Retractable Hard Tonneau Cover #311-SWF7084 is not fitting correctly because it is not confirmed for your 2020 Ford F-350 Super Duty with 8 foot bed. You will need The Pace Edwards JackRabbit Retractable Hard Tonneau…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 7

When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric doesn't billow in the wind or leave enough slack that…

view full answer...

Answer 8

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 9

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Answer 10

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 11

Yes, the Solera Slide Topper part #LCV000168106 is the correct fit for your flange width of 90-1/2 inches. This specific model has a box width range of 86 to 91-3/4 inches which is perfect for your width listed.

view full answer...

Answer 12

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

High Pressure Propane Hose With 3/8" Female NPT And 3/8" SAE Flare Swivel

Product Page this Question was Asked From

Continue Researching