Recommended 50' 50 Amp RV Power Cord

Question

Question:

Hi George, Doyou have the EH 5050LHEVD, 50 ft. 50 amp cord?

asked by: Brad R

1

Helpful Expert Reply:

We do offer a few options for 50' 50amp RV Power Cord's of which I recommend the Mighty Cord 50' RV Power Cord Extension w/ Finger Grip Handle # A10-5050EH which is rated for 125/250v and 50 amps to safely allow you to plug in your camper or motorhome. The added Find Grip Handle's will allow for a safe and easy way to disconnect the cord.

I included a video of the Mighty Cord 50' RV Power Cord # A10-5050EH for you to take a look at.

expert reply by: Samuel C

1

Answer 1

The Mighty Cord 50' RV Power Cord Extension #A10-5050EH that you referenced weighs 29 lbs. That may seem like a lot but it's a pretty thick cord that is 50 feet long.

view full answer...

Answer 2

The Valterra Mighty Cord 50' RV Power Cord Extension w/ Finger Grip Handle - 125/250V - 50 Amp #A10-5050EH the hot wires are the 6 gauge and the ground is 8 gauge. I confirmed this with the manufacturer for you, so you will have 3 wires that are…

view full answer...

Answer 3

If I'm understanding you correctly, you'll be able to use your standard outlet at your home using an adapter like the Mighty Cord #A10-1550 , but you won't be able to use a standard extension cord . Using a household extension cord with…

view full answer...

Answer 4

The wiring inside the Mighty Cord 50' RV Power Cord Extension #A10-5050EH is copper.

view full answer...

Answer 5

The cable on the Mighty Cord 50' RV Power Cord Extension #A10-5050EH is an SJT cable which is required for heavy duty applications. It is a thermoplastic made of rubber and plastic. It bends well even in cold weather. In order to be UL rated…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Recommended 50' 50 Amp RV Power Cord

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching