Looking for Replacement Covers for Thule Roof Racks?

Question

Question:

I am looking for a Thule part for my roof rack. The part number is 8522929001 cap. Is this something you may have or know where to get. I need 2. Thanks

asked by: Kevin

0

Expert Reply:

I have a possible part for you, but the exact part number you sent does not have any matches. Is the Replacement Cover for TH460 Podium Foot Pack # 852-2382001 what you're looking for? This is the replacement cap for Thule Rapid Podium Feet # TH460R.

If that is not what you need, let me know what kind of roof rack towers/feet you have, and I will see what I can find. If you are not sure what they are, you can also send some pictures.

expert reply by: Evangeline M

0

Kevin

12/3/2020

I am looking for a Thule part for my roof rack. The part number is 8522929001 cap. Is this something you may have or know where to get. I need 2. Thanks

Reply

Evangeline M.

12/3/2020

If you have square crossbars, it sounds like you have Thule Podium Foot Pack # TH460 and not # TH460R. TH460 is no longer active, but we still have a replacement cover for it # 852-2382001. This should be a fit for your tower.

Reply

Answer 1

The Thule #TH480R foot pack isn't compatible with the square crossbars unless they're the newer style that have the slots in the underside. Unfortunately, Thule no longer offers feet that are compatible with the older-style square bars nor is…

view full answer...

Answer 2

The Replacement Cover #852-2382001 is the correct part for both styles of the Thule Podium foot pack so it will work for the 460 for the square crossbars or the 460R for aero-style crossbars like what you have.

view full answer...

Answer 3

The Thule UpRide Roof Bike Rack #TH599000 referenced in your question uses a front stainless steel strap and a rear bracket to clamp around roof rack crossbars. This mounting hardware will work just fine with the Rhino-Rack Vortex Aero Crossbars…

view full answer...

Answer 4

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 5

I have a solution for you but the Thule Rapid Traverse foot #7522249001 you've got mounts to the vehicle with vehicle specific fit kit pieces; it looks like the fit kit is damaged and there is not a fit kit for the 2003 Toyota Matrix since it has…

view full answer...

Answer 6

The Replacement Self-Adhesive M5 Washer for Thule 54" Top Track System #853-5367 is a nylon washer. This is a replacement part for the Thule Roof Mounted Top Rack System - 54" Long #THTP54.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

You are correct that this refrigerator does not have an ON/OFF switch or function. The best you can do is "Standby" that draws an unknown amount of power. One option is to pull the 12-Volt fuse at the RV power center. A much better option…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...