Which Wedge to Use with Curt A20 and Turning Point Pin Box

Question

Question:

I have a Curt A20 hitch and need the correct size of wedge for use with a Turning Point pin box. Do you have a recommendation?

asked by: Orlando

0

Expert Reply:

The correct wedge to use with a Curt A20 # C16140 and a Turning Point Pin Box is the wedge # C16992 that you referenced.

expert reply by: Jameson C

0

Answer 1

You are totally fine. Curt and Sidewinder both make wedges for the Curt A16 hitch you have and both will work great. The Reese/Sidewinder brand is the part #RP31016 and the Curt brand is part #C16992. You&#39;ll notice that the design for…

view full answer...

Answer 2

3/16 of an inch is a solid amount of gap that&#39;s not too lose and not too tight. Basically you wanted as tight as you can get without causing it to become difficult to connect or disconnect so what you are doing now seems to be correct…

view full answer...

Answer 3

Essentially the difference is just two different manufacturers making the same product. Reese makes the #RP31016 who is who makes the Sidewinders whereas the Curt #C16992 is made by the company who makes the Curt A Series hitches. Either would work…

view full answer...

Answer 4

Your Mopar M25 hitch is actually a Curt A-25 hitch and would be compatible with your Sidewinder pin box, you&#39;d just need to use wedge kit #C16992 to lock the king pin into the jaws of the hitch. If your new Ram has an 8 &#39; bed…

view full answer...

Answer 5

The Curt A-Series line is the premium version over the Q-Series line and comes with a few differences. One major difference being the jaw design for the A-Series, which overlaps itself instead of just butting up to itself like the Q-Series does.…

view full answer...

Answer 6

I have exactly what you need to use the Turning Point pin box with your Curt A16 5th wheel trailer hitch. It is custom wedge #C16992. Customers have reported that the custom wedges designed for the Sidewinder pin boxes (similar to the Turning…

view full answer...

Answer 7

The factory puck system that was available for your 2017 Ram 2500 is integrated into the frame and cannot be installed as an aftermarket part. There are some underbed mounted fifth wheel hitch install kits but as of right now none of them install a…

view full answer...

Answer 8

I've never heard of a 5th wheel hitch using fans, but it is possible for parts on a 5th wheel hitch to wear out over time and need to be replaced just like other equipment on your RV (suspension parts, awning, vent/AC just to name a few).…

view full answer...

Answer 9

The first thing you'll need to flat tow your 2015 Chevy Malibu LS is a base plate kit like the Roadmaster part #RM-523178-5 that is a confirmed fit. In addition to the base plates, you will also need a compatible tow bar, safety cables,…

view full answer...

Answer 10

I've contacted Brightway, who forwarded me a copy of the instructions they include with the #BRW77FR switch mode charger. I've provided a clip showing the instructions for you.

view full answer...

Answer 11

The first thing to check is that the power source you have the Bright Way Switch Mode Battery Charger #BRW77FR is actually producing power. If you have power you should see at least the "Power On" light lit up on the charger. You…

view full answer...

Which Wedge to Use with Curt A20 and Turning Point Pin Box

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching