Is the Anderson Greaseless Hitch Ball AM3662 Still Available

Question

Question:

Hello - Do you still carry Andersen - AM3662 Andersen greaseless hitch ball? If not, what would you recommend?

asked by: Jason S

0

Expert Reply:

We do offer a greaseless hitch ball but it is in the from of the Anderson Rapid Hitch Adjustable, Aluminum Ball Mount Kit part # AM3461 or part # AM3405. This ball mount is made of aluminum so it's super lightweight, has multiple adjustments for use with different trailers, and has the greaseless hitch ball design for a smooth maintenance free operation.

The Anderson Greaseless Hitch Ball is no longer available as it has been discontinued by the manufacturer.

expert reply by: Conner L

0

Answer 1

I went out to the warehouse to measure Dutton-Lainson trailer coupler #DL13897 for you. The base where the mounting holes are is 2-1/4 inches. From the bottom to the top of the closed latch is 4-1/8 inches. And with the latch open it is 6-1/8…

view full answer...

Answer 2

Just to make sure we are accurate on the actual rise you may need, lets cover some basics. With the tow vehicle parked on level ground, measure from the ground to the top of your hitch receiver opening. Then, with the trailer level, measure from the…

view full answer...

Answer 3

From the research I did on your tire size of 8.55-15ST that would indicate that the modern tire size equivalent is ST225/75R15 which is a very common tire size. The Provider trailer tire part #TTWTRTM2257515D is a great option for that size. It has a…

view full answer...

Answer 4

The Flash E Series Adjustable 2-Ball Mount w Chrome Balls part #FA42-00-2600 would be the prefect fit for your 2019 Ford F-150. It is designed to work with the 2" hitch currently on your truck. The weight limit for the 2" Ball is 8,000 lbs…

view full answer...

Answer 5

If one of the hitch pins you have now has a usable pin length of at least 3-7/8" then you can use it on the adjustment portion of the Flash E Series Adjustable 2-Ball Mount w Chrome Balls part #FA42-00-2600. If not then you would want to use the…

view full answer...

Answer 6

The capacity for the lock set part number #FA86-00-3660 that you referenced is going to be the max capacity the ball mounts these are designed for have. That would be 10,000 lbs total trailer weight and 1,000 lbs tongue weight.

view full answer...

Answer 7

Yes, you can use the Rapid Hitch Andersen Adjustable Ball Mount part #AM3410 in the rise position if you wanted to get more rise out of it. It can provide up to 6 inches of rise in that position.

view full answer...

Answer 8

Well, it worked! I even had another guy come over and give it a read. It is possible that the many years of pushing and pulling on your balls have enlarged the hole they fit in causing the movement you are experiencing. You could disassemble the big…

view full answer...

Answer 9

The B&W adjustable ball mounts all use chrome balls. Fastway has ball mount #DTSTBM6400-2S with stainless steel balls. Stainless steel doesn't have the wear problems that chrome does but it does cost more. We also have #AM3461 that has the…

view full answer...

Is the Anderson Greaseless Hitch Ball AM3662 Still Available

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching