Replacement Clamps for my Extang Trifecta Tonneau Cover

Question

Question:

Will this work on 2019 tacoma trd 5 ft bed?

asked by: Chris A

0

Expert Reply:

Yes we sell both of the clamps required to attach your Extang Trifecta 2.0 Soft Tonneau Cover part # EX92830 to your 2019 Toyota Tacoma. These are designed to work with the standard bed with out the deck rail system. There is not a trifecta available that works with the deck rail system.

For the front edge the Replacement Clamps for Extang Trifecta Soft Tonneau Covers part # EX2244-0204 and for the rear the Replacement Tail Clamp Assembly for Extang Tonneau Covers part # EX31003005 are the ones you will need.

expert reply by: Randy B

0

Answer 1

I reached out to my contact at Extang and was told that air may be getting underneath the Extang Trifecta 2.0 Soft Tonneau Cover #EX92830. To fix this issue, drop the tailgate and look inside the bed to see if you can see light coming through in the…

view full answer...

Answer 2

When installing the Replacement Cab Clamp Assembly #EX1034 on your Extang Tonneau Cover you will first need to remove the screws from the crossbow/support rail of the cover. This is what will allow you to both remove the existing/damaged cab clamp as…

view full answer...

Answer 3

Most critical to trailer tire performance and durability are 1) proper inflation 2) observance of the tire's rated load capacity and 3) observance of the tire's speed rating. If either of these factors is off the mark then the tire will tend…

view full answer...

Answer 4

I wish I could say yes, but as of right now they are not a fit for the 2016 models and we do not have any other suspension enhancement options. If you are trying to fight suspension sag from the tongue weight of a trailer there is a better option. A…

view full answer...

Answer 5

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 6

A cover being installed on your spare tire would not prevent the Swagman Bike Rack part #S80501 from installing. The rack would still fit and work well. You might still compare the dimensions in the picture I attached with you spare tire so that you…

view full answer...

Answer 7

We have one option that will work for you. The Trailer Hub and Drum Assembly - 4,400-lb E-Z Lube Axles - 10" Diameter - 6 on 5-1/2 #8-407-5UC3-EZ uses inner bearing #L68149 and outer bearing #LM67048 so it would work perfectly on your spindle.…

view full answer...

Answer 8

We do have the Rhino-Rack Masterkey Lock Barrels #RRRK093-2 which will provide you with 2 new lock cores and keys for your Rhino-Rack Zenith MasterFit Rooftop Cargo Box #RRRMFZ66. As far as pricing goes on the different sets they can change based on…

view full answer...

Answer 9

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 10

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 11

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 12

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...