How to Install Womens bike on Thule Camber 2 Bike Rack

Question

Question:

How does the rack accept 1 mens and 1 Womens bike..the difference being the x-bar design that is different for each bike? Thanks

asked by: Binoy B

0

Expert Reply:

The Thule Camber 2 Bike Rack # TH9058 can fit some women's, children's, and alternative frame bikes. There are some bikes that will require the Thule Bike adapter bar # TH982XT to mount level. I attached the videos for both the Thule bike rack # TH9058 and the Thule adapter bar to demonstrate how to ensure your bikes are installed level.

expert reply by: Samuel C

0

Answer 1

The Thule Camber 2 Bike Rack #TH9058 weighs approximately 28-lbs. I've attached a brief video that shows this rack.

view full answer...

Answer 2

All you have to do is measure the hitch opening left to right or top to bottom, it doesn't matter. Don't measure the outside of the hitch, just the opening. Take a look at the picture I have included. Whether you Jeep Liberty factory…

view full answer...

Answer 3

The Thule Camber 2 bike rack #TH9058 fits both 1-1/4 inch and 2 inch hitches so it will fit the 1-1/4 inch hitch on your 2013 Mercedes GLK. I have included a link to a video review of this bike rack for you. If you will be carrying any bikes that…

view full answer...

Answer 4

The arms of the Thule Camber 2, part #TH9058, aren't exactly parallel to the ground. Instead, they are slightly inclined, meaning there isn't a set height from the ground. However, you can use 30 inches for an approximate measurement from the…

view full answer...

Answer 5

There are a few bike racks that can fit on your 2010 Toyota RAV4 without hitting the spare tire. However, I recommend the Thule Camber 2 Bike Carrier #TH9058. We have test fitted this bike rack on your vehicle and it does not come into contact with…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 12

It is going well and I'd be happy to help you! For a 2024 Honda CR-V Hybrid Sport, I recommend the etrailer Hitch item #e98848 you were looking at. We have confirmed through our vendor and customer reviews that this hitch will fit the hybrid…

view full answer...

How to Install Womens bike on Thule Camber 2 Bike Rack

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching