Roof Rack Key for Lock Core Number N002

Question

Question:

Roof rack key on my tumbler it just has 002 which key should I get

asked by: Michael M

0

Expert Reply:

Since your key number is 002 the key you'd need is # THKEYN002.

expert reply by: Jameson C

0

Answer 1

My contact at Thule advised that for the crossbars on your 2014 Jeep Grand Cherokee that have lock core 163 you can use their Replacement Key #THKEYN163. This is sold as a single key so you might want order a few to keep spares on hand.

view full answer...

Answer 2

Assuming your roof rack is one you got from Thule or SportRack - which we often see has lock cores that start with "E" - we do have the right replacement key for you, though it is not 142, because the key number and lock numbers don't…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 10

Yes, we sure do! I recommend our own branded etrailer Trailer Hitch Receiver #e79AR. This has the common 2" opening for many accessories and ball mounts. It is coated in our matte black finish so that it blends in well with the OEM appearance…

view full answer...

Answer 11

The K-Source Snap & Zap Custom Towing Mirrors #KS80930 are our best towing mirrors for your 2023 Chevrolet Silverado 1500. These mirrors snap onto your existing mirrors without any other brackets or parts needed. There are cutouts for turn…

view full answer...

Answer 12

Both the Rhino-Rack Vortex Aero and Thule WingBar roof rack systems have very nice features and would work well for your 2014 Hyundai Santa Fe. Both systems are designed to work on vehicles that have the flush mounted rail system. As far as the…

view full answer...

Roof Rack Key for Lock Core Number N002

Product Page this Question was Asked From

Continue Researching