Rhino-Rack LED Mounting Bracket Compatibility with 40 Inch LED Light Bar

Question

Question:

Hey! Will this Rhino-Rack LED Bracket #RR43174 support the ExtremeLED Light Bar super-stealth-40-led-light-bar-combo-spot-and-flood? If not, are there any adapters or modifications available? Thanks!

asked by: Jonathan

0

Expert Reply:

The LED Light Mounting Brackets for Rhino-Rack Vortex Aero and Heavy-Duty Crossbars # RR43174 has a weight capacity of 16.5 lbs. The Super Stealth 40" LED Light Bar (Combo - Spot and Flood) you mentioned I can't find a weight on but as long as it is under 16.5 lbs it will work well.

expert reply by: Jason S

0

Answer 1

The light bar in the linked review video for the Rhino-Rack LED Light Mounting Brackets #RR43174 that you referenced is the MaxxTow Off-Road Light Bar #MT80634. This receives its power from hardwiring and comes with a switch for easy and simple…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Answer 6

Hey there Stormy, I think we can figure this out, as there are a quite a few options. First, let's just discount the heavy-duty rack, as those are just oddly shaped crossbars and there's nothing HD about them (like you mentioned, they have…

view full answer...

Answer 7

We have the LED light mounting bracket part #RR43174 which can be used in the top channel of a Thule Wing Bar like the part #TH711520 that you mentioned. We have the Rhino Rack Batwing part #RR33200 that can also fit the top channels of a ladder rack…

view full answer...

Answer 8

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 9

The Universal Awning Fit Kit for Rhino-Rack Vortex Aero #RR31111 will attach to the Rhino-Rack Vortex Aero Crossbars #RRVA137B-2. The brackets will mount on the bars and provide you an L shaped bracket for mounting an awning. The LED Light Mounting…

view full answer...

Answer 10

I am happy to help you with a complete flat tow setup for your raised 2003 Ford Excursion. You will want to start with base plates Blue Ox Base Plate Kit - Fixed Arms #BX2163. I suggest installing your base plates using Loctite Threadlocker #LT37420.…

view full answer...

Answer 11

The Replacement M10 Channel Nut for Rhino-Rack Accessories #RR89TB has a M10 thread size and base dimensions of 35mm x 19mm x 8mm.

view full answer...

Rhino-Rack LED Mounting Bracket Compatibility with 40 Inch LED Light Bar

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching