Heartland Prowler Trailer Taillight Replacements

Question

Question:

I need a drivers side tail light for my new 2021 travel trailer. It is a heartland prowler 250BH. I see that you have a passenger side light replacement but I cannot find the drivers side.

asked by: James H

1

Helpful Expert Reply:

I looked up pictures of your 2021 Heartland Prowler and the taillights it uses are the part # RVSTB60 for the passenger side and # RVSTB61 for the driver side.

expert reply by: Jameson C

1

Answer 1

I do have options for you but there would be no way for me to know what type of light bulbs your trailer lights use. For trailer lights there are generally two types which are bayonet or push-in. Most taillights use a 1156 or 1157 bulb like part…

view full answer...

Answer 2

I recommend getting ones that will look somewhat similar to the lights you remove. I suggest getting this one for the license plate side #RVSTB61 and this one for the other side #RVSTB60. These will have all the functions you need on the rear of your…

view full answer...

Answer 3

I spoke with my contact at Ventline and she stated that if you have a newer EZ Lift Ventadome, the correct replacement lid will be part #BVE0108-03. This smoke color lid features a plastic hinge with four mounting points. You can compare the hinge…

view full answer...

Answer 4

When you replace the glass top part #C-FSRE21SA-SS-003 on a Furrion 2-in-1 Range Oven like part #FSRE21SABL you are replacing the whole top of the oven not just the glass portion. You will lift the old top upwards until it releases from the oven.…

view full answer...

Answer 5

For your Optronics light part as2t216 we have found that the correct replacement lens is the part #AST60B.

view full answer...

Answer 6

For your Optronics light part as2t216 we have found that the correct replacement lens is the part #AST60B. Normally the SAE number isn't a reliable way to find lens replacements as it's not a part number but we do know that this SAE number…

view full answer...

Answer 7

To order the correct Solera replacement arm size, simply measure the length of the wall-mount extrusion from top to bottom. I've pointed this out using the photo you sent in as an example. Short styles will measure 61-1/2" and use part…

view full answer...

Answer 8

We do indeed carry Optronics products. The number you provided is a DOT reference number, and does not denote the part number of the lamp or the lens. However we had a picture sent in once from a guy of the housing of the light he needed a lens for…

view full answer...

Answer 9

Yes, the motor for the Lippert Components PSX2 Electric RV Stabilizer can be replaced without obtaining an entire new system. The Replacement Motor and Gear Box Assembly for Lippert Components PSX2 Electric RV Stabilizers part #LC759091 is what you…

view full answer...

Answer 10

The 5th Wheel Pin Box Cover for Lippert 1621 #LC301458 only comes in white, however there isn't a reason that you couldn't paint it whatever color you want. The 5th Wheel Pin Box Cover for Lippert 1621 is actually made of ABS plastic which is…

view full answer...

Answer 11

The part #LC301458 is made of ABS plastic and as long as you use a paint that is compatible with that you could easily paint it.

view full answer...

Answer 12

The controller is only putting out voltage when the manual switch is applied on the brake controller, but not when the vehicle brakes are applied, is that correct? The most likely problem is that the controller is not getting the input that the…

view full answer...

Heartland Prowler Trailer Taillight Replacements

Product Page this Question was Asked From

Continue Researching