Lens Replacement for Trailer Taillight with SAE Number AS2T216

Question

Question:

hi, need to replace tail light on my rv. Optronics # on lens is SAE 2 AS2T216 10 DOT. Can you give me the correct item # ? Thanks

asked by: Jim W

0

Expert Reply:

For your Optronics light part as2t216 we have found that the correct replacement lens is the part # AST60B. Normally the SAE number isn't a reliable way to find lens replacements as it's not a part number but we do know that this SAE number matches this lens.

expert reply by: Jameson C

0

Answer 1

For your Optronics light part as2t216 we have found that the correct replacement lens is the part #AST60B.

view full answer...

Answer 2

We do indeed carry Optronics products. The number you provided is a DOT reference number, and does not denote the part number of the lamp or the lens. However we had a picture sent in once from a guy of the housing of the light he needed a lens for…

view full answer...

Answer 3

Yes, based on my research the Optronics Lens #AST60B is indeed the correct replacement for your existing AS2T216 model assembly. To be extra sure you can also quickly compare the dimensions of your current lens to this replacement, which measures…

view full answer...

Answer 4

While never tested for your application the RVS monitor part #RVS-6139N does use the same 13 pin connector as your ZoneDefense and since this pinout is an industry standard the circuits should all match and it would work.

view full answer...

Answer 5

The correct wet bolt/ shackle upgrade kit for your MORryde CRE/3000 axle will depend on the length of your current shackle links, measured center hole to center hole. For 2-1/4 inch shackle links, use #MR46ZR or for 3-1/8 inch shackle links, use…

view full answer...

Answer 6

The closest compatible option for your Dometic DOTR12CB RV microwave's size is the Furrion Standard RV Microwave #FMSN09BL. It measures 19-1/16" W x 13-5/8" H x 15-7/8" D with a 0.9 cu ft capacity.

view full answer...

Answer 7

If your original light is 4" L x 2" W x 1-1/8" D then Optronics light #MC32AB will fit in its place. If you have different dimensions let me know what they are and I can see if we have anything that is a match.

view full answer...

Answer 8

An E3 error code means there's a communication error between the zone controller and the thermostat. Since you've already tried connecting the wires from the thermostat directly to the zone controller (great idea btw) and still are having…

view full answer...

Answer 9

You can certainly use the Reese #83660 sway control kit on both sides of your trailer A-frame. There's a couple of ways to do this, but the most simple way would be to use your existing ball mount, and have a #C45822 sway control tab welded on…

view full answer...

Answer 10

I don't have any reference to the "S2T216AP2 " that you provided but based on my research it sounds like you might have the Optronics LED Combination Trailer Tail Lights part #TLL160RK. If that is the case then the correct replacement…

view full answer...

Answer 11

For an LED version of the light you sent in a picture of you'd want the part #STL22RB with the grommet part #A70GB. I also attached an install video for this for you to check out as well. Since I am not totally sure what the other marker lights…

view full answer...

Answer 12

From what we've found online, the proper replacement for your S2T216AP2 is #STL16RB for the passenger side and #STL17RB for the driver side.

view full answer...

Lens Replacement for Trailer Taillight with SAE Number AS2T216

Product Page this Question was Asked From

Continue Researching