Can SkinnyWarrier Cargo Basket Fit on My Crossbar Spread?

Question

Question:

I have fixed rhino rack vortex bars at 48.3inch from center to center. Will rack fit?

asked by: Austin M

0

Expert Reply:

The Yakima SkinnyWarrior Roof Rack Cargo Basket # Y07014 (without extension) fits on a crossbar spread of 24" - 38". The SkinnyWarrior # Y07014-16 with the extension making it a 74" long cargo basket can fit on a crossbar spread of 30" to 60".

With your Rhino-Rack Vortex Bars like # JA7972 that are sitting 48.3 inches apart, the SkinnyWarrior # Y07014-16 can definitely fit onto your bars. My main note is that you need to carry it with its extension attached, because its shorter configuration is too short for your bars.

The Yakima Warrior Series is a great series of cargo baskets. My favorite part about them is how you can customize them with different accessories to fit your specific needs. You can pick up items like a Stretch Net # Y07018 to wrap around your cargo or etrailer Cam Buckle Straps # E98876-2 to tie down large items like boxes or kayaks.

expert reply by: Evangeline M

0

click to enlarge

Answer 1

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 2

I have a Yakima crossbar setup that is compatible with the Retrax Pro XR Tonneau Cover on your 2021 Toyota Tacoma, however, the Yakima Bedrock is not compatible and the 60" crossbars would be too short anyways. I recommend going with the…

view full answer...

Answer 3

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 6

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Hi Tyler, When adding in air springs on a lifted vehicle the proper way to determine the correct sized spacer is to first install the upper and lower brackets and then measure the distance between them and subtract the height of the air spring bellow…

view full answer...

Answer 9

The answer to your question will depend on how you use your truck. Vehicle-based systems like the RoadActive Suspension system or air bags will work just fine with a weight distribution system, but they work best to suspend weight being hauled in the…

view full answer...

Answer 10

Thanks for all the details! We definitely have a way to get a cargo basket and an awning installed on your 2024 Toyota Highlander, although the aftermarket roof rack systems will use a clamping system with your door jambs instead of mounting via…

view full answer...

Answer 11

I have a couple options for your Carolyn. The first is to replace your current side rails with the XR Rails #RTT-82381 on the Cover #RTX37VR so you will have the T-Slots. Other wise using a reack like the Adarac #A54KG would be an option as this…

view full answer...

Answer 12

The Large Yakima OffGrid #Y07139 Cargo Basket uses crossbar clamps that are designed to be universal. They will fit virtually any crossbar shape, including most aftermarket and OEM crossbars. I was not able to find any schematics online that would…

view full answer...

Can SkinnyWarrier Cargo Basket Fit on My Crossbar Spread?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching