Does this Replacement Lithium Converter # PD4590LICSV Work with Progressive Dynamics Power Center?

Question

Question:

I need to know if this part will work for PD4590K18L on a 2015 vengeance reeper?

asked by: Erica M

0

Expert Reply:

Yes, the Replacement Lithium Converter # PD4590LICSV will work for your PD4590K18L. I checked with Power Dynamics to make sure that the difference between your part and the # PD4590K18LS8 would still allow for use with the Lithium Converter, and they confirmed that is the case.

expert reply by: John R

0

Answer 1

The Lippert Components Power Stabilizer Trailer Jack #LC298707 does include the control switch but not the Linc Remote #LC292614 which is compatible if you have the remote receiver #LC305117. I reached out to my contact at Lippert and the retracted…

view full answer...

Answer 2

I took a look at your now discontinued 2 Function Hydraulic Wireless Transmitter Remote P/N 248046, however Lippert does not disclose what battery type this remote takes, however I have another soluton. Since your remote is discontinued, along with…

view full answer...

Answer 3

For the Progressive Dynamics 4500 series converter the correct part you need to convert to a lithium profile is the part #PD4590LICSV which will provide your Lithium battery setup with the correct higher voltage to charge safely.

view full answer...

Answer 4

The #PD4590LICSV converter would indeed be the correct Lithium compatible upgrade for your existing PD4590K18NS2 4500 series RV Power Control Center. I've confirmed this with Progressive Dynamics. I've linked to a product description and an…

view full answer...

Answer 5

For charging lithium batteries you will need the Replacement Lithium Converter #PD4590LICSV for your Progressive Dynamics power center. The Replacement Converter Section #PD4590CSV is for lead acid and AGM batteries.

view full answer...

Answer 6

The correct replacement converter section for your 90 amp 4500 series Progressive Dynamics panel that is compatible with Lithium batteries is the part #PD4590CSV.

view full answer...

Answer 7

The Replacement Lithium Converter for Progressive Dynamics 4500 Series RV Power Control Center #PD4575LICSV that you referenced is a dual fan setup.

view full answer...

Answer 8

You do not want to pull any fuses in the 2019 Chevy Equinox when you flat tow and you do want to keep the battery connected. In the past there has been issues with extreme wobble when flat towing an Equinox because of pulling the fuse for the body…

view full answer...

Answer 9

Yes, you will be able to use the Replacement Lithium Converter #PD4590LICSV on your Progressive Dynamics PD4590K18LS2. I confirmed this information with Progressive Dynamics.

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Does this Replacement Lithium Converter # PD4590LICSV Work with Progressive Dynamics Power Center?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching