2-1/2 Inch Shank for Eaz-Lift Weight Distribution Hitch
Question:
We have a Eaz lift weight distribution system with a 2 inch shank. When we upgraded our truck, it has a 2 1/2 inch receiver so we have been using a reducer for the receiver but we still dont like the play it has. Can we just replace the shank with a 2 1/2 inch or do we also have to replace the weight distribution head so it fits a 2 1/2 inch shank
asked by: Dana G
Expert Reply:
You can go from a 2 inch shank to a 2-1/2 inch shank with your Eaz-Lift weight distribution system. Weight distribution shanks are essentially universal so you won't have any issues. You just need a shank that has the proper rise or drop you are require.
The options for 2-1/2 inch shanks are as follows, with the rise and drops listed the maximum for the shanks:
- Equal-i-zer Weight Dist Shank - 7" Rise, 3" Drop # EQ90-02-4700
- Equal-i-zer Weight Distribution Shank - 13" Rise, 9" Drop # EQ94FR
- Curt Weight Distribution Shank - 6" Rise - 2" Drop # C17131
- Curt Weight Distribution Shank - 12" Rise - 9-1/4" Drop # C17132
![Kyle S](https://images.etrailer.com/static/images/catg/people/1237_tn.jpg)
Products Referenced in This Question
Curt Weight Distribution Shank for 2.5" Hitches - 9-1/4" or 10" Drop - 13" Rise
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1500 lbs TW
- 15000 lbs GTW
- Fits 2-1/2 Inch Hitch
- Round - 10 Inch Drop
- Trunnion - 9 Inch Drop
- Round - 13 Inch Rise
- Trunnion - 13 Inch Rise
- CURT
more information >
Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 7" Rise, 3" Drop
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1400 lbs TW
- Fits 2-1/2 Inch Hitch
- Equal-i-zer
- Square - 3 Inch Drop
- Square - 7 Inch Rise
- Equal-i-zer
more information >
Equal-i-zer Weight Distribution Shank - 12" Long - 13" Rise, 9" Drop
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- Fits 2-1/2 Inch Hitch
- Equal-i-zer
- Square - 9 Inch Drop
- Square - 12 Inch Rise
- Equal-i-zer
more information >
Product Page this Question was Asked From
Curt Weight Distribution Shank for 2-1/2" Hitches - 6-3/4" Rise - 3-1/4" Drop
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1500 lbs TW
- 15000 lbs GTW
- Fits 2-1/2 Inch Hitch
- Round - 3 Inch Drop
- Trunnion - 2 Inch Drop
- Round - 6 Inch Rise
- Trunnion - 6 Inch Rise
- CURT
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 10" Rise/6" Drop
- Shop: Fastway Trailer Hitch Lock and Adjustment Pin Lock Set for Flash E Series HD Ball Mounts
- Shop: Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 8" Rise, 4" Drop
- Search Results: drop hitch
- Search Results: weight distribution hitch head
- Shop: Blue Ox SwayPro Weight Distribution w/ Sway Control - Clamp On - 15,000 lbs GTW, 1,500 lbs TW
- Shop: Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 16,000 lbs GTW, 1,600 lbs TW
- Search Results: weight distribution ball mount
- Search Results: 2 12 inch ball mount
- Q&A: Diagram with Dimensions for Curt Weight Distribution Shank C17132
- Shop: Curt Weight Distribution Shank for 2.5" Hitches - 9-1/4" or 10" Drop - 13" Rise
- Video: Choosing the Right Trailer Wiring
- Shop: Grease Seals 10-36 (pair)
- Search Results: 44649
- Q&A: Wiring a Camper Shell Third Brake Light on a 2017 Chevrolet Silverado
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Search Results: 68149
- Video: Choosing the Right Brake Controller
- Shop: Trailer Wiring
- Q&A: Replacement 5 Leaf Slipper Spring for a Tandem Axle Dump Trailer with Two 6K Axles
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: 25580
- Video: Roadmaster Automatic Battery Disconnect Installation - 2020 GMC Sierra 1500
- Shop: Fifth Wheel Hitch
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Article: Trailer Tire Sizing
- Shop: Brake Controller
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Replacement LED Top Command Clearance Light With SAE-AP2-16 On Lens For 2018 Sunseeker Motorhome