Will the Trailerlegs Tire Saver Stands Bend or Dent my Axle

Question

Question:

Would trailerlegs affect the axle by denting, bending the axle? Will this affect the alignment too? I uploaded pictures of my axle to make sure it will work with my trailer

asked by: Jose

0

Expert Reply:

The TrailerLegs Tire Saver Stands for Trailers w/ Leaf Spring Suspensions part # 326-TRLLG-4 are designed from a very dense polyethylene material that while very strong it is not as strong as steel. This means if any thing were to bend or deform it would be the TrailerLegs but this is not something that is a very plausible.

They work really well and will work for your trailer without and risk of damage.

expert reply by: Randy B

0

Answer 1

We do have other anti rattle devices that we carry, but nothing specifically designed to limit fore/aft movement. If you have already tried The Blue Ox immobilizer #BX88312, I'm afraid I do not have a more effective anti rattle device that I can…

view full answer...

Answer 2

As long as the ground is level and stable (meaning not mud or anything else you may sink into) the TrailerLegs Tire Saver Stands #326-TRLLG-4 can be used and they'd work fine.

view full answer...

Answer 3

Yes, there are anti-rattle devices that can be used with the Equal-i-zer Weight Distribution System to prevent the shank from sliding back and forth and damaging the hitch pin hole. The Equal-i-zer System has a solid shank which means the only type…

view full answer...

Answer 4

The Blue Ox Hitch Receiver Immobilizer III #BX88312 is a universal fit and we haven't had the opportunity to test it on a 2016 Ford F-250 factory trailer hitch so I can't verify how well it will fit on your truck. The same goes for a 9000…

view full answer...

Answer 5

The Blue Ox Hitch Receiver Immobilizer III #BX88312 is going to be the best way to eliminate rattle and play from your 2-1/2" receiver with the 2" adapter. This device uses 2 U-Bolts around the hitch to pull it tight into the corner of the…

view full answer...

Answer 6

I have just what you need for saving your 5th wheel trailer tires from getting flat spots, the TrailerLegs Tire Saver Stands. Kit #326-TRLLG-4 for tandem axles and kit #326-TRLLG-6 for triple axle trailers allow you to lift your trailer up off the…

view full answer...

Answer 7

The TrailerLegs Tire Saver Stands #326-TRLLG-4 are perfectly safe for your axles and will not cause any damage whatsoever. Axles are designed to bear the weight of a trailer and using the TrailerLegs does not affect their capacity or ability to do…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...