Does Wireless Remote of Brake Buddy 3 # HM39524 Have to Mount Flat

Question

Question:

Can the wireless remote for the Brake Buddy 3 be mounted vertically as opposed to laying flat on the RV dash?

asked by: Terry A

0

Expert Reply:

The wireless remote of the Brake Buddy 3 # HM39524 does not have a specific orientation that it has to mount in so you could use it vertically or horizontally as needed.

expert reply by: Jameson C

0

Answer 1

We can't recommend you drill into the base plate to mount the breakaway switch as that would void the warranty of the base plate kit. Instead I would recommend mounting the switch to the bumper of the vehicle.

view full answer...

Answer 2

For your 2018 Jeep Wrangler JL, I recommend starting with the Roadmaster EZ5 Base Plate Kit #RM-521453-5. This kit has removable arms to give you a very clean look when not flat towing your Jeep, and also gives you a clean connection to your tow bar…

view full answer...

Answer 3

I am sorry to hear that you did not receive the instructions for your Brake Buddy Select 3 Portable Supplemental Braking System #HM39524. But yes, there is an online version of the instructions and I have linked them here for you. The Brake Buddy…

view full answer...

Answer 4

When it comes to flat towing your 2018 Fiat 500 with Manual Transmission you're able to flat tow it and will need the following: Roadmaster Crossbar-Style Base Plate Kit - Removable Arms #522013-1A Replacement Quick Disconnect Crossbar Assembly…

view full answer...

Answer 5

The Blue Ox Patriot Portable Braking System - Proportional #BLU37TR includes an in-coach RF controller that plugs into a 12V outlet in the cab of the motorhome. This unit allows you to have the manual braking override of other brake controllers, and…

view full answer...

Answer 6

The gain knob of the Blue Ox Patriot #BLU37TR allows you to basically dial in how aggressive/sensitive you want the accelerometer to be. If you dial it in with high gain the unit will apply the brakes harder when detecting braking, lower and it will…

view full answer...

Answer 7

When braking systems like the #HM39524 Brake Buddy Select 3 are designed, the engineers know that with the vehicle not running, there won't be any brake assist. Portable braking systems such as the Brake Buddy Select 3 will have no problem…

view full answer...

Answer 8

Since you are not getting the 12V power when your truck is running, you most likely don't have a fuse issue as you stated their isn't a specified fuse or relay in the owners manual. The issue is that your truck is computerized even at the…

view full answer...

Answer 9

It sounds like you are asking about connecting the breakaway switch of the Brake Buddy Classic 3 Portable Supplemental Braking System #HM39494. I cut out some pages from the instruction manual for you to check out, but what you'll do is actually…

view full answer...

Answer 10

Yes, you will want to remove any rubber floor mat when you're installing the Brake Buddy Select 3 #HM39524. It doesn't say this in the instructions but it's still recommended. I confirmed this with my contact at Hopkins/Brake Buddy.

view full answer...

Answer 11

Because the Brake Buddy uses power from the vehicle's battery to actuate, you will need to set up the charge circuit as directed in the installation instructions. The parts needed to accomplish this are included with the Brake Buddy.

view full answer...

Answer 12

The only Brake Buddy system we have that fits your 2021 Jeep Wrangler is the Brake Buddy Stealth Supplemental Braking System #HM39530.

view full answer...

Does Wireless Remote of Brake Buddy 3 # HM39524 Have to Mount Flat

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching