Replacement Hardware Kit for Westin 3 inch Step Bars for 2006 GMC Sierra 1500 Crew Cab

Question

Question:

THIS 23-299PK replacement kit will work with 2006, gmc, sierra 1500 4wd crew cab for Westin Platinum Series 3 inch

asked by: Cesar E

0

Expert Reply:

For your 2006 GMC Sierra 1500 with Westin 3 inch diameter nerf bars the correct hardware replacement kit you'd need is the part # 23-195PK.

expert reply by: Jameson C

0

Answer 1

Yes, what you need is the part #23-050pk. This is the replacement hardware for the #23-0500 bars you have that will fit your 1992 GMC truck.

view full answer...

Answer 2

The correct replacement hardware for your Westin E-Series Round Nerf Bars - 3" - Polished Stainless Steel #23-1680, is the Replacement Hardware for Westin E-series Step Bars #23-168PK.

view full answer...

Answer 3

If the Westin bars you have originally did fit your 2006 Chevy Silverado the correct replacement install hardware would be the part #23-195PK. If the bars came off of a different truck though they would not be able to fit your truck by just swapping…

view full answer...

Answer 4

The hardware kit for the Platinum series round nerf bars on your 2007 GMC Sierra is the Replacement Installation Hardware Kit for Westin Platinum series Round Nerf Bars Item #25-195PK. This kit fits the 2007 GMC Sierra 2500 new body style and the…

view full answer...

Answer 5

You will want to first consult your vehicle owners manual but based on my research your truck has a standard towing capacity of 7,500 pounds and max towing capacity of 10,500 pounds. The max is usually either with the truck properly equipped or when…

view full answer...

Answer 6

From the picture you provided, it looks like you have the Westin E-Series 3" Round Nerf Bars #23-1680 which is confirmed to fit your 2008 GMC Sierra 1500 extended cab. The correct replacement hardware kit is #23-168PK. If your running boards are…

view full answer...

Answer 7

The correct replacement hardware for the Westin Platinum Series Nerf Bars on your 2001 Chevy Silverado is part #25-168PK. They're designed to fit certain GM trucks from the early 2000's. I've attached the install details as well as an…

view full answer...

Answer 8

We have the Westin Hardware kit part #23-299PK that you referenced. If that's what you need you're in luck!

view full answer...

Answer 9

The Nerf Bars that install with the hardware you referenced do attach to the frame, as you can see by the accompanying cut out of the instructions that I added. It is important to note that the Replacement Mounting Brackets and Hardware for Westin…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Replacement Hardware Kit for Westin 3 inch Step Bars for 2006 GMC Sierra 1500 Crew Cab

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching