Tow Mirror Recommendation for 2019 Nissan Armada

Question

Question:

Will this be a good fit for a 2019 Nissan Armada or is there a better model to extend my mirrors? Thanks!

asked by: Jeffrey

0

Expert Reply:

We have universal fit tow mirrors that will work great on your 2019 Nissan Armada like the K-Source part # KS3891 but we do not have slip on mirrors that fit your vehicle like the # CM11402 that you mentioned. The # KS3891 installs easily and is very secure so it is a really great option that we would recommend for your Armada.

expert reply by: Jameson C

0

Answer 1

While we do not have any towing mirrors that are confirmed to fit your 2021 Nissan Armada; the K-Source Universal Towing Mirrors #KS69ZR is a universal clip on mirror that will fit most applications spanning from 4-1/2" tall to 11-1/2"…

view full answer...

Answer 2

We do not have custom slip on mirrors for your 2020 Nissan Armada but you can use the CIPA #7070-2 Universal Towing Mirrors. They are quick and easy to strap onto your existing mirrors I use the same mirror myself for the past two years and have no…

view full answer...

Answer 3

Due to the unique style of mirrors that the 2021 Nissan Armada has you'd need to to use a door mounted mirror like the part #11650-2 as there are not slip-on styles of mirrors that fit your vehicle. Door mounted mirrors generally give a wider and…

view full answer...

Answer 4

Thanks for reaching out! The K-Source Universal Towing Mirrors #KS3891-2 will typically fit a mirror that is 4-1/2" to 11-1/2" tall. We haven't had the opportunity to install this on a 2019 Nissan Armada as of yet (November 2022) but if…

view full answer...

Answer 5

As far as function goes, the two controllers are actually pretty similar. The primary difference between the two is that the P3 uses what I would call a more user friendly display. Instead of an error code like what's displayed on the P2, the P3…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 8

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 9

To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…

view full answer...

Answer 10

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 11

Yes, the best option we can offer you to add fuel capacity is with the DeeZee Truck Bed Auxiliary Tank part #DZ91752X which should fit in the space you have between the cab and 5th wheel hitch no problem as it is only 9" deep. I don't have…

view full answer...

Answer 12

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...